source: SVN/cambria/redboot/host/tools/ecostest/ChangeLog @ 1

Last change on this file since 1 was 1, checked in by Tim Harvey, 2 years ago

restored latest version of files from server backup

Signed-off-by: Tim Harvey <tharvey@…>

File size: 26.5 KB
Line 
12001-02-20  Jonathan Larmour  <jlarmour@redhat.com>
2
3        * common/eCosTestClient.cpp (LocateExecutables): Add /sbin and
4        /usr/sbin to path before trying to run fuser.
5
62000-09-28  Jesper Skov  <jskov@redhat.com>
7
8        * common/eCosTestSerialFilter.cpp (CMD_TestBinary): Reset counter
9        for each test so the failure data is the same from two different
10        runs of the test.
11
122000-09-15  Jesper Skov  <jskov@redhat.com>
13
14        * common/ser_filter.cpp (main): Don't require ResourceServer.
15
16        * common/Makefile.am: Added ser_filter handling.
17        * common/Makefile.in: Ditto.
18        * common/configure: Ditto.
19        * common/configure.in: Ditto.
20        * common/eCosTest.cpp: Fix typo.
21
222000-08-16  Jonathan Larmour  <jlarmour@redhat.co.uk>
23
24        * common/ser_filter.cpp (main): Clean up warning
25
262000-08-08  Jonathan Larmour  <jlarmour@redhat.co.uk>
27
28        * common/eCosTestSerialFilter.h: Update flow_cfg_t values for correct
29        target settings
30
312000-08-01  Jonathan Larmour  <jlarmour@redhat.co.uk>
32
33        * common/eCosTestSerialFilter.cpp (PrintHex): Print out more printable
34        chars
35        (SetConfig): Support flow control
36        (ParseConfig): Support target setting of flow control
37        (CMD_TestBinary): Don't output XON/XOFF. Output 255 chars not 256
38        to make buffer problems more obvious.
39
40        * common/eCosTestDownloadFilter.h: Allow SET_VALUE to set optional args
41        * common/eCosTestSerialFilter.h: Allow SET_VALUE to set optional args
42        Also add flow_cfg_t type and flags member in ser_cfg_t for flow control
43
442000-07-24  Jonathan Larmour  <jlarmour@redhat.co.uk>
45
46        * common/eCosTestSerialFilter.cpp (FilterFunctionProper):
47        Store output for tracing up so it is output a packet at a time.
48        As well as clarifying the output, it is required when sending to
49        GDB to prevent the trace 'O' packets in the middle of target packets.
50        (CMD_TestBinary): Delay to allow target to read in checksum. This
51        prevents overruns before finishing reading the checksum masking
52        the real cause of the problem.
53        (CeCosTestSerialFilter): Initialise stored trace buffer members
54
55        * common/eCosTestSerialFilter.h: Add trace buffer members for above
56        to CeCosTestSerialFilter
57
582000-06-19  John Dallaway  <jld@redhat.com>
59
60        * unix/Makefile:
61
62        Link with -lposix4 under Solaris for sched_yield().
63
642000-06-16  Jonathan Larmour  <jlarmour@redhat.co.uk>
65
66        * common/eCosTestDownloadFilter.cpp: Remove RCS id tags
67        * common/eCosTestMonitorFilter.cpp: Ditto
68        * common/eCosTestSerialFilter.cpp: Ditto
69
702000-06-15  John Dallaway  <jld@redhat.com>
71
72        * common/eCosTest.cpp:
73
74        Modify CeCosTest construvtor to use GetEnvironmentVariable()
75        rather than _tgetenv() under Win32. For some unknown reason,
76        _tgetenv() is not returning the correct version of PATH.
77
78        * common/eCosTestPlatform.cpp:
79
80        Modify SaveToRegistry() to save all test platform attributes.
81
822000-05-03  Bart Veer  <bartv@redhat.com>
83
84        * common/permtest.cxx (find_ptest):
85        Do a little bit of searching for the permutation file.
86        Catch errors and give a diagnostic, rather than aborting because
87        of an uncaught C++ exception.
88
892000-04-14 Simon FitzMaurice <sdf@redhat.co.uk>
90  * common\ResetAttributes.cpp : do not carry forward values for skipped fields in reset strings
91  * common\eCosTest.cpp : Avoid overflow in socket timeouts
92   
932000-04-13  Jesper Skov  <jskov@redhat.com>
94
95        * unix/Makefile: add randfile
96
972000-04-13  Jesper Skov  <jskov@redhat.com>
98
99        * common/eCosTestDownloadFilter.cpp: Cast Write arguments to void*.
100
1012000-04-13 Simon FitzMaurice <sdf@redhat.co.uk>
102  * common\ResetAttributes.cpp
103    common\eCosTest.cpp
104    common\eCosTestClient.cpp
105
106  Ensure socket timeout matches on_off/off_on delay for reset
107  Correct parsing of eCosTestClient delay args.
108  Use remote resource to determine baud rate for default download timeout.
109
1102000-04-13 Simon FitzMaurice <sdf@redhat.co.uk>
111  * common\ResetAttributes.cpp
112    common\eCosTest.cpp
113    common\eCosTest.h
114    common\eCosTestClient.cpp
115    common\eCosTestServer.cpp
116    common\eCosTestUtils.cpp
117    common\rgdb.cpp
118    common\summlog.cpp
119    common\x10reset.cpp
120    win32\eCosTest.dsp
121
122  Tidy up reset output.
123  Police use of -f and -r switches more accurately.
124  Set default timeout in all cases.
125
1262000-04-11 Simon FitzMaurice <sdf@redhat.co.uk>
127  * common\ResetAttributes.cpp
128    common\ResetAttributes.h
129    common\ResourceServer.cpp
130    common\TestResource.cpp
131    common\TestResource.h
132    common\X10.h
133    common\X10d.cpp
134    common\eCosTest.cpp
135    common\eCosTest.h
136    common\eCosTestClient.cpp
137    common\eCosTestDownloadFilter.cpp
138    common\eCosTestDownloadFilter.h
139    common\eCosTestMonitorFilter.cpp
140    common\eCosTestMonitorFilter.h
141    common\eCosTestSerialFilter.cpp
142    common\eCosTestSerialFilter.h
143    common\eCosTestServer.cpp
144    common\eCosTestUtils.cpp
145    common\eCosTestUtils.h
146    common\resetall.cpp
147    common\rgdb.cpp
148    common\ser_filter.cpp
149    common\stat.cpp
150    common\summlog.cpp
151    common\x10reset.cpp
152    unix\Makefile
153    win32\eCosTest.dsp
154    win32\Amplicon\AmpliconD.cpp
155
156  General tidy-up.
157
1582000-04-10  Bart Veer  <bartv@redhat.com>
159
160        * common/permtest.cxx (main):
161        Add diagnostics callbacks to database initialization.
162
1632000-03-20  John Dallaway  <jld@cygnus.co.uk>
164
165        * win32/eCosTest.dsp:
166
167        Add common/eCosTestMonitorFilter.h and
168        common/eCosTestMonitorFilter.cpp to the project.
169
1702000-03-16  Jesper Skov  <jskov@redhat.com>
171
172        * common/eCosTestMonitorFilter.h:
173        * common/eCosTestMonitorFilter.cpp:
174        * common/ser_filter.cpp:
175        * unix/Makefile (common_sources):
176        Added monitor filter and new -m option to ser_filter. This allows
177        simple monitoring of the traffic between host and target.
178
1792000-03-15  John Dallaway  <jld@cygnus.co.uk>
180
181        * common/eCosTest.cpp:
182
183        Modify RunGdb() to sleep 500ms if there is no message.
184
1852000-03-13 Simon FitzMaurice <sdf@redhat.co.uk>
186  * common\ResourceServer.cpp
187    common\TestResource.cpp
188    common\eCosTest.cpp
189    common\eCosTestClient.cpp
190    common\eCosTestSerial.cpp
191    common\eCosTestSerial.h
192    common\eCosTestSocket.cpp
193    common\eCosTestSocket.h
194    common\eCosTestUtils.cpp
195    common\randfile.cpp
196    common\rgdb.cpp
197    common\ser_filter.cpp
198
199        Mark UNIX sections of code as such.
200        Correct behavior of eCosTestClient when give directory as argument.
201        A couple of allocations -> stack for simplicity.
202
2032000-03-10 Simon FitzMaurice <sdf@redhat.co.uk>
204  * common\ResetAttributes.cpp
205    common\ResourceServer.cpp
206    common\X10.cpp
207    common\TestResource.cpp
208    common\TestResource.h
209    common\X10d.cpp
210    common\eCosTest.cpp
211    common\eCosTest.h
212    common\eCosTestDownloadFilter.cpp
213    common\eCosTestSerial.cpp
214    common\eCosTestServer.cpp
215    common\eCosTestSocket.cpp
216    common\rgdb.cpp
217    common\ser_filter.cpp
218    common\x10reset.cpp
219    unix\Makefile
220    win32\eCosTest.dsp
221    win32\Amplicon\AmpliconD.cpp
222               
223        Move CeCosTrace class to its own file
224        Increase Time type to 64 bits to avoid signedness problems
225  Remove priority latch functionality
226
227  * common\eCosTestUtils.cpp
228    common\eCosTestUtils.h
229
230  Make CommandLine() UNICODE-compliant
231
232
233  * common\summlog.cpp
234
235        Remove hack designed to cater for incorrectly terminated output lines
236
237  * win32\SingleCPU.cpp
238
239        Provide ability to run on named processor
240
241  * common\eCosTestClient.cpp
242
243        Improve recognition of non-executable files on UNIX
244
2452000-03-09 Simon FitzMaurice <sdf@redhat.co.uk>
246  * win32\SingleCPU.cpp
247
248  Avoid a performance problem with bash which, when left to its own devices, is slow on multi-processor machines.
249
2502000-03-09  John Dallaway  <jld@cygnus.co.uk>
251
252        * common/eCosTest.cpp,
253          common/eCosTest.h:
254
255        Use 'REMOTE_SIM' as the platform type identifier for
256        remote simulators.
257
2582000-03-09  Bart Veer  <bartv@redhat.com>
259
260        * common/permtest.cxx (main):
261        Add an explicit call to resolve_all_conflicts(), although I am not
262        yet sure under what circumstances this would be necessary.
263
2642000-03-08 Simon FitzMaurice <sdf@redhat.co.uk>
265  * common\eCosTestClient.cpp
266
267  Correct logic error - - allow multiple threads only when non-local
268
2692000-03-08  Bart Veer  <bartv@redhat.com>
270
271        * common/configure.in (cyg_ac_infra_libdir):
272        Fix typo detected by Solaris build
273
274
2752000-03-08 Simon FitzMaurice <sdf@redhat.co.uk>
276  * common\summlog.cpp
277
278  Eliminate compiler warnings on UNIX.
279
2802000-03-08 Simon FitzMaurice <sdf@redhat.co.uk>
281  * common\eCosTestClient.cpp
282
283        Prevent locally running clients loading from resource server.
284
2852000-03-08 Simon FitzMaurice <sdf@redhat.co.uk>
286  * common\eCosTest.cpp
287    common\summlog.cpp
288
289  Ensure that gdb output is terminated by a newline and that summlog initializes target list correctly.
290
2912000-03-08 Simon FitzMaurice <sdf@redhat.co.uk>
292  * common\ResetAttributes.cpp
293    common\X10d.cpp
294    common\eCosTest.cpp
295    common\eCosTestClient.cpp
296    win32\Amplicon\AmpliconD.cpp
297
298  Add name argument to RunThread calls for debugging.
299        Do not allow wait for SuckTheadfunc in reset to time out - thread already has a timeout
300
301  * win32\eCosTest.dsw :        Adapt to new location of cdl.dsp
302  * common\summlog.cpp : ensure eCosTest::Init() and Term() are called
303
304
3052000-03-08 Simon FitzMaurice <sdf@redhat.co.uk>
306  * common\ResetAttributes.cpp
307    common\ResourceServer.cpp
308    common\X10d.cpp
309    common\eCosTest.cpp
310    common\eCosTest.h
311    common\eCosTestClient.cpp
312    common\eCosTestServer.cpp
313    common\eCosTestUtils.cpp
314    common\eCosTestUtils.h
315    common\resetall.cpp
316    common\rgdb.cpp
317    common\ser_filter.cpp
318    common\stat.cpp
319    common\summlog.cpp
320    common\x10reset.cpp
321    win32\Amplicon\AmpliconD.cpp
322
323        Eliminate GarbageCollector class in favor of CeCosTest::Init() and CeCosTest::Term()
324        Fix UNICODE problems in eCosTestUtils
325
3262000-03-08  Bart Veer  <bartv@redhat.com>
327
328        * common/permtest.cxx (process_startup):
329        Look for CYGHWR_HAL_STARTUP as well as CYG_HAL_STARTUP
330
3312000-03-08  John Dallaway  <jld@cygnus.co.uk>
332
333        * win32/eCosTest.dsw:
334
335        Use relocated cdl project file.
336
3372000-03-07  Bart Veer  <bartv@redhat.com>
338
339        * common/permtest.cxx (process_startup):
340        If a target does not have a CYG_HAL_STARTUP option, ignore any
341        attempts to set the startup.
342
3432000-03-07 Simon FitzMaurice <sdf@redhat.co.uk>
344  * common\ResetAttributes.cpp
345    common\ResetAttributes.h
346    common\ResourceServer.cpp
347    common\TestResource.cpp
348    common\TestResource.h
349    common\X10.cpp
350    common\X10d.cpp
351    common\eCosTest.cpp
352    common\eCosTest.h
353    common\eCosTestClient.cpp
354    common\eCosTestDownloadFilter.cpp
355    common\eCosTestDownloadFilter.h
356    common\eCosTestSerial.cpp
357    common\eCosTestSerial.h
358    common\eCosTestSerialFilter.cpp
359    common\eCosTestSerialFilter.h
360    common\eCosTestServer.cpp
361    common\eCosTestSocket.cpp
362    common\eCosTestSocket.h
363    common\eCosTestUtils.cpp
364    common\eCosTestUtils.h
365    common\resetall.cpp
366    common\rgdb.cpp
367    common\ser_filter.cpp
368    common\stat.cpp
369    common\summlog.cpp
370    common\x10reset.cpp
371    win32\eCosTest.dsw
372    win32\Amplicon\AmpliconD.cpp
373
374        Use std::vector directly instead of StringArray, PtrArray
375        Introduce common command-line processing to CeCosTestUtils
376        Tidy output and trace functions and move to CeCosTrace
377
3782000-03-03 Simon FitzMaurice <sdf@redhat.co.uk>
379  * common\TestResource.h
380    common\eCosTest.cpp
381    common\eCosTest.h
382
383  Adjust for UNIX compiler requirements.
384
3852000-03-03 Simon FitzMaurice <sdf@redhat.co.uk>
386  * common\ResetAttributes.cpp
387    common\TestResource.cpp
388    common\X10d.cpp
389    common\eCosTest.cpp
390    common\eCosTest.h
391    common\eCosTestClient.cpp
392    common\eCosTestUtils.cpp
393    common\eCosTestUtils.h
394    unix\Makefile
395    win32\eCosTest.dsp
396    win32\Amplicon\AmpliconD.cpp
397
398  Thread-related code extracted to new class CeCosThreadUtils
399
4002000-03-03 Simon FitzMaurice <sdf@redhat.co.uk>
401  * common\TestResource.cpp
402    common\TestResource.h
403    common\eCosTest.cpp
404
405  Eliminate memory leaks.
406  Allow resources to be properly reused for benefit of Resource Tool.
407
4082000-03-02 Simon FitzMaurice <sdf@redhat.co.uk>
409  * common\ResetAttributes.cpp
410    common\ResetAttributes.h
411    common\ResourceServer.cpp
412    common\TestResource.cpp
413    common\TestResource.h
414    common\X10.cpp
415    common\X10d.cpp
416    common\eCosTest.cpp
417    common\eCosTest.h
418    common\eCosTestClient.cpp
419    common\eCosTestDownloadFilter.cpp
420    common\eCosTestDownloadFilter.h
421    common\eCosTestSerial.cpp
422    common\eCosTestSerial.h
423    common\eCosTestSerialFilter.cpp
424    common\eCosTestSerialFilter.h
425    common\eCosTestServer.cpp
426    common\eCosTestSocket.cpp
427    common\eCosTestSocket.h
428    common\eCosTestUtils.cpp
429    common\eCosTestUtils.h
430    common\resetall.cpp
431    common\rgdb.cpp
432    common\ser_filter.cpp
433    common\stat.cpp
434    common\stdafx.cpp
435    common\stop.cpp
436    common\summlog.cpp
437    common\x10reset.cpp
438    unix\Makefile
439    win32\eCosTest.dsp
440    win32\Amplicon\AmpliconD.cpp
441
442  Introduce flexible reset scheme.
443  Migrate more classes to Utils from eCosTest.
444  Introduce collections.h for String, StringArray etc...
445  Use common CSubprocess class implementation.
446
4472000-02-29 Simon FitzMaurice <sdf@redhat.co.uk>
448  * common\ResetAttributes.cpp : Ensure it compiles on unix
449
4502000-02-29 Simon FitzMaurice <sdf@redhat.co.uk>
451  * common\ResetAttributes.cpp : correct typo
452  * win32\eCosTest.dsw : add testtool
453       
4542000-02-29 Simon FitzMaurice <sdf@redhat.co.uk>
455  * common\ResetAttributes.cpp
456    common\ResetAttributes.h
457    common\ResourceServer.cpp
458    common\TestResource.cpp
459    common\TestResource.h
460    common\X10d.cpp
461    common\eCosTest.cpp
462    common\eCosTest.h
463    common\eCosTestClient.cpp
464    common\eCosTestSerial.cpp
465    common\eCosTestSerial.h
466    common\eCosTestSerialFilter.cpp
467    common\eCosTestServer.cpp
468    common\eCosTestSocket.cpp
469    common\eCosTestSocket.h
470    common\eCosTestStd.h
471    common\eCosTestUtils.cpp
472    common\eCosTestUtils.h
473    common\resetall.cpp
474    common\rgdb.cpp
475    common\stat.cpp
476    common\summlog.cpp
477    common\wcharunix.h
478    common\x10reset.cpp
479    win32\subprocess.cpp
480    win32\subprocess.h
481    win32\Amplicon\AmpliconD.cpp
482
483  Change to flexible reset scheme.
484  CeCosTestUtils::String -> String, CeCosTestUtils::StringArray -> StringArray
485
4862000-02-25 Simon FitzMaurice <sdf@redhat.co.uk>
487  * common\ResetAttributes.cpp
488    common\ResetAttributes.h
489    common\ResourceServer.cpp
490    common\TestResource.cpp
491    common\x10reset.cpp
492
493  Use ResetAttributes properties to serialize TestResource.
494
4952000-02-25 Simon FitzMaurice <sdf@redhat.co.uk>
496  * common\ResetAttributes.cpp
497    common\ResetAttributes.h
498    common\TestResource.cpp
499    common\X10.cpp
500    common\X10d.cpp
501    common\eCosTestClient.cpp
502    common\eCosTestServer.cpp
503    common\x10reset.cpp
504    win32\Amplicon\AmpliconD.cpp
505
506  Reset control string verification fully server-side
507
5082000-02-25 Simon FitzMaurice <sdf@redhat.co.uk>
509  * common\ResetAttributes.cpp
510    common\ResetAttributes.h
511    common\TestResource.cpp
512    common\X10.cpp
513    common\X10.h
514    common\X10d.cpp
515    common\eCosTest.cpp
516    common\eCosTestClient.cpp
517    common\eCosTestServer.cpp
518    common\x10reset.cpp
519    win32\Amplicon\AmpliconD.cpp
520 
521  Normalize control code usage to 0-15, 0-15
522
5232000-02-25 Simon FitzMaurice <sdf@redhat.co.uk>
524  * unix/Makefile : update for ResetAttributes
525
5262000-02-25 Simon FitzMaurice <sdf@redhat.co.uk>
527  * common\TestResource.cpp
528    common\TestResource.h
529    common\X10.cpp
530    common\X10.h
531    common\X10d.cpp
532    common\eCosTest.cpp
533    common\eCosTestClient.cpp
534    common\eCosTestServer.cpp
535    common\resetall.cpp
536    common\x10reset.cpp
537    win32\X10d.dsp
538    win32\eCosTest.dsp
539    win32\Amplicon\AmpliconD.cpp
540
541  Generalize "X10 reset" to "reset" - introduce ResetAttributes class to hold the details.
542
5432000-02-24 Simon FitzMaurice <sdf@redhat.co.uk>
544  * common\TestResource.cpp
545    common\TestResource.h
546    common\X10.h
547    common\X10d.cpp
548    common\x10reset.cpp
549    win32\eCosTest.dsw
550
551  Add Amplicon to "all" project.
552  Fail on reset if comms/tcp port cannot be opened.
553  Add -t (timeout on read) param to x10reset
554
5552000-02-24 Simon FitzMaurice <sdf@redhat.co.uk>
556  * common\TestResource.cpp
557    win32\eCosTest.dsw
558    win32\Amplicon\AmpliconD.cpp
559    win32\Amplicon\AmpliconD.dsp
560    win32\Amplicon\Dio_tc.h
561    win32\Amplicon\Dio_tc.lib
562
563  Implement Amplicon reset daemon in C++.
564
5652000-02-23 Simon FitzMaurice <sdf@redhat.co.uk>
566  * common\TestResource.cpp
567    common\X10d.cpp
568    common\eCosTest.cpp
569    common\eCosTest.h
570    common\eCosTestClient.cpp
571    common\eCosTestStd.h
572    common\eCosTestUtils.cpp
573    common\summlog.cpp
574    common\wcharunix.h
575
576  strnccmp -> _tcsicmp
577
5782000-02-23 Simon FitzMaurice <sdf@redhat.co.uk>
579  * win32\eCosTest.dsw
580
581  Add "All" utility project.
582
5832000-02-23 Simon FitzMaurice <sdf@redhat.co.uk>
584  * common\eCosTest.cpp
585    common\eCosTest.h
586
587  Allow HwTypes to be expressed as strings.
588   
5892000-02-23 Simon FitzMaurice <sdf@redhat.co.uk>
590  * common\TestResource.cpp
591    common\X10.cpp
592    common\X10d.cpp
593    common\x10reset.cpp
594
595  Change X10 daemon protocol to allow long delays
596
5972000-02-22 Simon FitzMaurice <sdf@redhat.co.uk>
598  * common\TestResource.cpp
599    common\eCosTest.cpp
600    common\eCosTestClient.cpp
601   
602  Adjust for Solaris.
603  Increase total reset timeout.
604
6052000-02-21 Simon FitzMaurice <sdf@redhat.co.uk>
606  * common\TestResource.cpp
607    common\TestResource.h
608    common\X10.h
609    common\eCosTest.cpp
610    common\eCosTest.h
611
612  Add "Originator", "Reason", "BoardId", "Email" and "Date" to known resource attributes.
613  Add reset timeout attribute.
614   
6152000-02-18 Simon FitzMaurice <sdf@redhat.co.uk>
616  * common\eCosTest.cpp
617    common\eCosTest.h
618
619  Changes to support non-gdb execution.
620
6212000-02-17 Simon FitzMaurice <sdf@redhat.co.uk>
622  * common\eCosTest.cpp
623
624  Remove incorrect #include
625
6262000-02-16 Simon FitzMaurice <sdf@redhat.co.uk>
627  * common\TestResource.cpp
628    common\eCosTest.cpp
629    common\eCosTest.h
630
631  Add support for defining platforms.
632
6332000-02-14 Simon FitzMaurice <sdf@redhat.co.uk>
634
635  * common\permtest.cxx
636
637  Update copyright headers in files with non-standard extensions :-)
638
6392000-02-14 Simon FitzMaurice <sdf@redhat.co.uk>
640  * common\ResourceServer.cpp
641    common\TestResource.cpp
642    common\TestResource.h
643    common\X10.cpp
644    common\X10.h
645    common\X10d.cpp
646    common\eCosTest.cpp
647    common\eCosTest.h
648    common\eCosTestClient.cpp
649    common\eCosTestDownloadFilter.cpp
650    common\eCosTestDownloadFilter.h
651    common\eCosTestSerial.cpp
652    common\eCosTestSerial.h
653    common\eCosTestSerialFilter.cpp
654    common\eCosTestSerialFilter.h
655    common\eCosTestServer.cpp
656    common\eCosTestSocket.cpp
657    common\eCosTestSocket.h
658    common\eCosTestStd.h
659    common\eCosTestUtils.cpp
660    common\eCosTestUtils.h
661    common\randfile.cpp
662    common\resetall.cpp
663    common\rgdb.cpp
664    common\ser_filter.cpp
665    common\stat.cpp
666    common\stdafx.cpp
667    common\stop.cpp
668    common\summlog.cpp
669    common\wcharunix.h
670    common\x10reset.cpp
671    win32\subprocess.cpp
672    win32\subprocess.h
673
674  Update copyright headers
675
6762000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
677  * win32\subprocess.cpp
678
679  Fix fix to handle leak.
680
681
6822000-02-07 Simon FitzMaurice <sdf@redhat.co.uk>
683  * win32\eCosTest.dsw
684
685  Add "All" target
686
687  * win32\subprocess.cpp
688
689  Fix handle leak
690
6912000-02-04 Simon FitzMaurice <sdf@redhat.co.uk>
692  * common\eCosTestDownloadFilter.cpp
693    common\eCosTestSerialFilter.cpp
694    common\eCosTestUtils.cpp
695
696  Correct for abnormal behaviour of vsnprintf under NT.
697
698  * win32\permtest.dsp
699
700  Use cdl from v:\ide
701
7022000-02-01 Simon FitzMaurice <sdf@redhat.co.uk>
703  * ecostest\common\TestResource.cpp
704    ecostest\common\eCosTest.cpp
705    ecostest\common\eCosTest.h
706    ecostest\common\eCosTestClient.cpp
707    ecostest\common\eCosTestDownloadFilter.cpp
708    ecostest\common\eCosTestSerialFilter.cpp
709    ecostest\common\eCosTestSocket.cpp
710    ecostest\common\eCosTestStd.h
711    ecostest\common\eCosTestUtils.cpp
712    ecostest\common\eCosTestUtils.h
713    ecostest\common\rgdb.cpp
714    ecostest\common\summlog.cpp
715    ecostest\win32\summlog.dsp
716
717  min->MIN for compilation on UNIX
718  CeCosTest::ExecutionParameters gains type as 1st argument
719  Performance improvements to summlog
720
7212000-02-01 Simon FitzMaurice <sdf@redhat.co.uk>
722  * common\ResourceServer.cpp
723    common\TestResource.h
724    common\X10.cpp
725    common\X10.h
726    common\X10d.cpp
727    common\eCosTestDownloadFilter.h
728    common\eCosTestSerial.cpp
729    common\eCosTestSerial.h
730    common\eCosTestSerialFilter.h
731    common\eCosTestServer.cpp
732    common\eCosTestSocket.h
733    common\randfile.cpp
734    common\resetall.cpp
735    common\ser_filter.cpp
736    common\stat.cpp
737    common\stdafx.cpp
738    common\stop.cpp
739    common\wcharunix.h
740    common\x10reset.cpp
741    win32\subprocess.cpp
742
743  Normalize copyright headers.
744
7452000-01-31  Bart Veer  <bartv@redhat.com>
746
747        * common\permtest.cxx (tcl_pkgconf_command):
748        Use the default template rather than the all template when
749        uItron is disabled. Downgrade an error to a warning to cope
750        with the watchdog device not being in the default template.
751       
7522000-01-28 Simon FitzMaurice <sdf@redhat.co.uk>
753  * common\eCosTest.cpp
754
755  Check cancelled status in gdb driving loop.
756
7572000-01-27 Simon FitzMaurice <sdf@redhat.co.uk>
758  * common\summlog.cpp
759
760  Ensure pass and inapplic separated in totals for the architectures by perm tables.
761
7622000-01-21 Simon FitzMaurice <sdf@redhat.co.uk>
763  * common\resourceserver.cpp
764
765  Efficiency improvements (single send on query)
766
7672000-01-20 Simon FitzMaurice <sdf@redhat.co.uk>
768  * common\summlog.cpp
769
770  Separate Pass and NA.
771  Fix problem w\ successful results not being counted.
772
7732000-01-19 Simon FitzMaurice <sdf@redhat.co.uk>
774  * common\eCosTest.cpp
775    common\eCosTestUtils.cpp
776    common\eCosTestUtils.h
777    common\summlog.cpp
778
779  Attempt to reduce memory usage of summlog.
780  Found possible problem - different specs of vsnsprintf on UNIX vs NT.
781
7822000-01-14 Simon FitzMaurice <sdf@redhat.co.uk>
783  * common\ResourceServer.cpp
784    common\eCosTest.cpp
785    common\eCosTestSocket.cpp
786
787  Cygnus -> Red Hat (not copyrights)
788
789  * common\summlog.cpp
790
791  Attempt to fix memory behaviour on UNIX.
792
7932000-01-14 Simon FitzMaurice <sdf@redhat.co.uk>
794  * summlog.cpp
795
796  Correct too-late release of string buffer.
797
7982000-01-13 Simon FitzMaurice <sdf@redhat.co.uk>
799  * eCosTest.cpp
800
801  Correct overload problem w\ Run
802
8031999-12-23  John Dallaway  <jld@redhat.co.uk>
804
805        * unix\Makefile:
806
807        Use g++ for compilation rather than egcs.
808
8091999-12-23  John Dallaway  <jld@redhat.co.uk>
810
811        * common\eCosTestUtils.h:
812
813        Use '#pragma warning' with Microsoft compiler only.
814
8151999-12-22 Simon FitzMaurice <sdf@redhat.co.uk>
816  * unix\makefile
817
818  Add stl library to link 
819
8201999-12-22 Simon FitzMaurice <sdf@redhat.co.uk>
821  * common\eCosTestUtils.h
822    common\eCosTest.cpp
823
824  Make it compile on UNIX
825
8261999-12-21 Simon FitzMaurice <sdf@redhat.co.uk>
827  * win32\eCosTest.dsw
828
829  Remove TestTool (as an MFC project using properties it cannot link against the non-MFC eCosTest library)
830
831  * common\ResourceServer.cpp
832
833  Do not read the files if unchanged since last time
834
835  * common\summlog.cpp
836
837  Remove remote PR lookup functionality
838
8391999-12-17  John Dallaway  <jld@redhat.co.uk>
840
841        * win32\permtest.dsp:
842
843        Generate RTTI when building permtest.
844
8451999-12-17  Jonathan Larmour  <jlarmour@redhat.co.uk>
846
847        * common\permtest.cxx (tcl_value_command): Ensure BoolData options
848        are enabled if they are given a value
849
8501999-12-15  John Dallaway  <jld@redhat.co.uk>
851
852        * win32\permtest.dsp:
853
854        New VC++ project.
855
856        * win32\eCosTest.dsw:
857
858        Add the new permtest project to the eCosTest
859        workspace.
860
8611999-12-14  John Dallaway  <jld@redhat.co.uk>
862
863        * common\permtest.cxx:
864
865        Further changes to accommodate the recent libCDL
866        API changes.
867
868        * common\permtest.cxx:
869
870        Accommodate the recent libCDL API changes.
871
8721999-12-08 Simon FitzMaurice <sdf@redhat.co.uk>
873  * common\eCosTest.cpp
874    common\eCosTest.h
875    common\eCosTestUtils.cpp
876    common\eCosTestUtils.h
877
878    Tighter policing of GetBuffer().
879    Fix vFormat (needed terminating \0)
880
8811999-12-07 Simon FitzMaurice <sdf@redhat.co.uk>
882
883  * common\TestResource.cpp
884    common\TestResource.h
885    common\eCosTest.cpp
886    common\eCosTest.h
887    common\eCosTestClient.cpp
888    common\eCosTestSerialFilter.cpp
889    common\eCosTestServer.cpp
890    common\eCosTestSocket.cpp
891    common\eCosTestSocket.h
892    common\eCosTestUtils.cpp
893    common\eCosTestUtils.h
894    common\rgdb.cpp
895    common\wcharunix.h
896    common\x10reset.cpp
897    win32\eCosTest.dsp
898
899  Base string class on STL.
900  Use subprocess class (like than in CT)
901
9021999-11-23  John Dallaway  <jld@redhat.co.uk>
903
904        * unix\Makefile:
905
906        Add explicit pattern matching rule for compiling .cpp files.
907
9081999-11-11  Bart Veer  <bartv@redhat.co.uk>
909
910        * common\permtest.cxx:
911        Be more tolerant in the data that is accepted, to allow for
912        incompatibilities between the old and new worlds.
913
9141999-11-09  Bart Veer  <bartv@redhat.co.uk>
915
916        * common\permtest.cxx
917        Replacement for permtest.tcl
918
919        * common\acinclude.m4
920        * common\configure.in
921        * common\Makefile.am
922        * common\configure
923        * common\Makefile.in
924        * common\aclocal.m4
925        Build support for permtest.tcl replacement
926
9271999-10-20  John Dallaway  <jld@redhat.co.uk>
928
929        * win32\eCosTest.dsp, win32\eCosTest.mak,
930          win32\ResourceServer.dsp, win32\ResourceServer.mak:
931
932        Fix intermediate and output directories for the release build.
933
9341999-10-19  Jesper Skov  <jskov@redhat.co.uk>
935
936        * common\X10d.cpp: Allow using '0' as a NOP serial device for the
937        reset controller.
938
939        * common\eCosTest.cpp: Send 'quit' to GDB after 'bt'.
940
9411999-10-18  Jesper Skov  <jskov@redhat.co.uk>
942
943        * unix\Makefile [deleted]:
944        * unix\Makefile [added]:
945        Better makefile.
946
9471999-10-14  Jesper Skov  <jskov@redhat.co.uk>
948
949        * common\ser_filter.cpp: Enabled DL filter as default.
950
951        * common\eCosTestDownloadFilter.h:
952        * common\eCosTestDownloadFilter.cpp:
953        * common\eCosTest.cpp (ConnectSocketToSerialThreadFunc):
954        Allow two connections during a session if the first one is a file
955        download.
956       
957        * common\eCosTestServer.cpp: Added missing arg.
958
9591999-10-13  Jesper Skov  <jskov@redhat.co.uk>
960
961        * common\eCosTestDownloadFilter.h:
962        * common\eCosTestDownloadFilter.cpp:
963        Use Buffer instead of array for in-buffer. Made its size an
964        argument of the info packet.
965        Added status to protocol (OK\DL failure\transfer failure)
966       
9671999-10-11  Jesper Skov  <jskov@redhat.co.uk>
968
969        * common\eCosTest.cpp (ConnectSocketToSerialThreadFunc): Enabled
970        download filter.
971
972        * common\eCosTestDownloadFilter.cpp: Fixed a few compiler warnings.
973
9741999-10-08  Jesper Skov  <jskov@redhat.co.uk>
975
976        * unix\makefile: Fixed.
977
978        * common\eCosTest.cpp:
979        * common\eCosTest.h:
980        * common\eCosTestSocket.cpp:
981        * common\eCosTestSocket.h:
982        * common\ser_filter.cpp:
983        Changed ConectSocketToSerial to take parameter for both serial and
984        socket filters.
985
986        * common\eCosDownloadFilter.cpp: [added]
987        * common\eCosDownloadFilter.h: [added]
988        * common\ser_filter.cpp:
989        Added download filter.
990
9911999-10-07  John Dallaway  <jld@redhat.co.uk>
992
993        * common\eCosTest.cpp,
994          common\eCosTest.h:
995
996        New GetGreatestSubkey() function returns the name of
997        the subkey of the specified key with the greatest value.
998
999        Modify InitTargetInfoReg() to look in the HKEY_LOCAL_MACHINE
1000        hierarchy rather than the HKEY_CURRENT_USER hierarchy.
1001
1002        Modify InitTargetInfo() to construct the platforms registry
1003        key using GetGreatestSubkey().
Note: See TracBrowser for help on using the repository browser.