source: SVN/rincon/u-boot/board/esd/du440/init.S @ 55

Last change on this file since 55 was 55, checked in by Tim Harvey, 22 months ago

rincon: added latest u-boot source

restored form server backup

Signed-off-by: Tim Harvey <tharvey@…>

File size: 2.9 KB
Line 
1/*
2 * (C) Copyright 2008
3 * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <ppc_asm.tmpl>
25#include <asm-ppc/mmu.h>
26#include <config.h>
27
28/*
29 * TLB TABLE
30 *
31 * This table is used by the cpu boot code to setup the initial tlb
32 * entries. Rather than make broad assumptions in the cpu source tree,
33 * this table lets each board set things up however they like.
34 *
35 * Pointer to the table is returned in r1
36 */
37    .section .bootpg,"ax"
38    .globl tlbtab
39
40tlbtab:
41        tlbtab_start
42
43        /*
44         * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
45         * speed up boot process. It is patched after relocation to enable SA_I
46         */
47        tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
48
49#ifdef CFG_INIT_RAM_DCACHE
50        /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
51        tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
52#endif
53
54        /* TLB-entry for PCI Memory */
55        tlbentry( CFG_PCI_MEMBASE, SZ_256M,  CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
56        tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
57        tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
58        tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
59
60        /* TLB-entry for PCI IO */
61        tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
62
63        /* TLB-entries for EBC:  CPLD, DUMEM, DUIO */
64        tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
65        tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
66        tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
67
68        /* TLB-entry for NAND */
69        tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
70        tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
71
72        /* TLB-entry for Internal Registers & OCM */
73        tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
74
75        /* TLB-entry PCI registers */
76        tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )
77
78        /* TLB-entry for peripherals */
79        tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
80
81        tlbtab_end
Note: See TracBrowser for help on using the repository browser.