source: SVN/rincon/u-boot/cpu/mpc824x/drivers/errors.h @ 55

Last change on this file since 55 was 55, checked in by Tim Harvey, 2 years ago

rincon: added latest u-boot source

restored form server backup

Signed-off-by: Tim Harvey <tharvey@…>

File size: 7.5 KB
Line 
1/*      Copyright Motorola, Inc. 1993, 1994
2        ALL RIGHTS RESERVED
3
4        You are hereby granted a copyright license to use, modify, and
5        distribute the SOFTWARE so long as this entire notice is retained
6        without alteration in any modified and/or redistributed versions,
7        and that such modified versions are clearly identified as such.
8        No licenses are granted by implication, estoppel or otherwise under
9        any patents or trademarks of Motorola, Inc.
10
11        The SOFTWARE is provided on an "AS IS" basis and without warranty.
12        To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
13        ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
14        WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
15        PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
16        REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
17        THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
18
19        To the maximum extent permitted by applicable law, IN NO EVENT SHALL
20        MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
21        (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
22        BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
23        INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
24        INABILITY TO USE THE SOFTWARE.   Motorola assumes no responsibility
25        for the maintenance and support of the SOFTWARE.
26
27*/
28
29
30#include "config.h"
31
32/*
33         1         2         3         4         5         6         7         8
3401234567890123456789012345678901234567890123456789012345678901234567890123456789
35*/
36/* List define statements here */
37
38/* These are for all the toolboxes and functions to use. These will help
39to standardize the error handling in the current project */
40
41                                /* this is the "data type" for the error
42                                messages in the system */
43#define STATUS unsigned int
44
45                                /* this is a success status code */
46#define SUCCESS 1
47
48                                /* likewise this is failure */
49#define FAILURE 0
50
51#define NUM_ERRORS 47
52
53/* This first section of "defines" are for error codes ONLY.  The called
54   routine will return one of these error codes to the caller.  If the final
55   returned code is "VALID", then everything is a-okay.  However, if one
56   of the functions returns a non-valid status, that error code should be
57   propogated back to all the callers.  At the end, the last caller will
58   call an error_processing function, and send in the status which was
59   returned.  It's up to the error_processing function to determine which
60   error occured (as indicated by the status), and print an appropriate
61   message back to the user.
62*/
63/*----------------------------------------------------------------------*/
64/* these are specifically for the parser routines                       */
65
66#define UNKNOWN_COMMAND         0xfb00 /* "unrecognized command " */
67#define UNKNOWN_REGISTER        0xfb01 /* "unknown register "*/
68#define ILLEGAL_RD_STAGE        0xfb02 /* cannot specify reg. family in range*/
69#define ILLEGAL_REG_FAMILY      0xfb03 /* "cannot specify a range of special
70                                        or miscellaneous registers"*/
71#define RANGE_CROSS_FAMILY      0xfb04 /* "cannot specify a range across
72                                        register families" */
73#define UNIMPLEMENTED_STAGE     0xfb05 /* invalid rd or rmm parameter format */
74#define REG_NOT_WRITEABLE       0xfb06 /* "unknown operator in arguements"*/
75#define INVALID_FILENAME        0xfb07 /* "invalid download filename" */
76#define INVALID_BAUD_RATE       0xfb08  /* invalid baud rate from sb command */
77#define UNSUPPORTED_REGISTER    0xfb09  /* Special register is not supported */
78#define FOR_BOARD_ONLY          0xfb0a  /* "Not available for Unix." */
79
80
81/*----------------------------------------------------------------------*/
82/* these are for the error checking toolbox                             */
83
84#define INVALID                 0xfd00 /* NOT valid */
85#define VALID                   0xfd01 /* valid */
86
87                                        /* This error is found in the fcn:
88                                        is_right_size_input() to indicate
89                                        that the input was not 8 characters
90                                        long.  */
91#define INVALID_SIZE            0xfd02
92
93                                        /* This error is found in the fcn:
94                                        is_valid_address_range() to indicate
95                                        that the address given falls outside
96                                        of valid memory defined by MEM_START
97                                        to MEM_END.
98                                        */
99#define OUT_OF_BOUNDS_ADDRESS   0xfd03
100
101                                        /* This error is found in the fcn:
102                                        is_valid_hex_input() to indicate that
103                                        one of more of the characters entered
104                                        are not valid hex characters.  Valid
105                                        hex characters are 0-9, A-F, a-f.
106                                        */
107#define INVALID_HEX_INPUT       0xfd04
108
109                                        /* This error is found in the fcn:
110                                        is_valid_register_number() to indicate
111                                        that a given register does not exist.
112                                        */
113#define REG_NOT_READABLE        0xfd05
114
115                                        /* This error is found in the fcn:
116                                        is_word_aligned_address() to indicate
117                                        that the given address is not word-
118                                        aligned.  A word-aligned address ends
119                                        in 0x0,0x4,0x8,0xc.
120                                        */
121#define NOT_WORD_ALIGNED        0xfd07
122
123                                        /* This error is found in the fcn:
124                                        is_valid_address_range() to indicate
125                                        that the starting address is greater
126                                        than the ending address.
127                                        */
128#define REVERSED_ADDRESS        0xfd08
129
130                                        /* this error tells us that the address
131                                        specified as the destination is within
132                                        the source addresses  */
133#define RANGE_OVERLAP           0xfd09
134
135
136#define ERROR                   0xfd0a /* An error occured */
137#define INVALID_PARAM           0xfd0b /* "invalid input parameter " */
138
139
140#define INVALID_FLAG            0xfd0c  /* invalid flag */
141
142/*----------------------------------------------------------------------*/
143/* these are for the getarg toolbox                                     */
144
145#define INVALID_NUMBER_ARGS     0xFE00 /* invalid number of commd arguements */
146#define UNKNOWN_PARAMETER       0xFE01 /* "unknown type of parameter "*/
147
148
149/*----------------------------------------------------------------------*/
150/* these are for the tokenizer toolbox                                  */
151
152#define ILLEGAL_CHARACTER       0xFF00 /* unrecognized char. in input stream*/
153#define TTL_NOT_SORTED          0xFF01 /* token translation list not sorted */
154#define TTL_NOT_DEFINED         0xFF02 /* token translation list not assigned*/
155#define INVALID_STRING          0xFF03 /* unable to extract string from input */
156#define BUFFER_EMPTY            0xFF04 /* "input buffer is empty" */
157#define INVALID_MODE            0xFF05 /* input buf is in an unrecognized mode*/
158#define TOK_INTERNAL_ERROR      0xFF06 /* "internal tokenizer error" */
159#define TOO_MANY_IBS            0xFF07 /* "too many open input buffers" */
160#define NO_OPEN_IBS             0xFF08 /* "no open input buffers" */
161
162
163/* these are for the read from screen toolbox */
164
165#define RESERVED_WORD           0xFC00 /* used a reserved word as an arguement*/
166
167
168/* these are for the breakpoint routines */
169
170#define FULL_BPDS               0xFA00 /* breakpoint data structure is full */
171
172
173/* THESE are for the downloader */
174
175#define NOT_IN_S_RECORD_FORMAT  0xf900 /* "not in S-Record Format" */
176#define UNREC_RECORD_TYPE       0xf901 /* "unrecognized record type" */
177#define CONVERSION_ERROR        0xf902 /* "ascii to int conversion error" */
178#define INVALID_MEMORY          0xf903 /* "bad s-record memory address " */
179
180
181/* these are for the compression and decompression stuff */
182
183#define COMP_UNK_CHARACTER      0xf800 /* "unknown compressed character " */
184
185#define COMP_UNKNOWN_STATE      0xf801 /* "unknown binary state" */
186
187#define NOT_IN_COMPRESSED_FORMAT 0xf802 /* not in compressed S-Record format */
188
189
190/* these are for the DUART handling things */
191
192                                        /* "unrecognized serial port configuration" */
193#define UNKNOWN_PORT_STATE      0xf700
194
195
196/* these are for the register toolbox */
197
198                                        /* "cannot find register in special
199                                         purpose register file " */
200#define SPR_NOT_FOUND           0xf600
201
202
203/* these are for the duart specific stuff */
204
205                                        /* "transparent mode needs access to
206                                                two serial ports" */
207#define TM_NEEDS_BOTH_PORTS     0xf500
208
209
210/*----------------------------------------------------------------------*/
211/* these are specifically for the flash routines                        */
212#define FLASH_ERROR             0xf100          /* general flash error */
Note: See TracBrowser for help on using the repository browser.