Changeset 40 in SVN for ventana

10/31/2017 08:14:52 PM (3 years ago)
Tim Harvey

Ventana: Updated pre-built OpenWrt BSP images

ventana-owrt-normal.ubi - NAND based boards with <2GB NAND
ventana-owrt-large.ubi - NAND based boards with 2GB NAND
ventana-owrt-normal.bin - JTAG image for boards with <2GB NAND
ventana-owrt-large.bin - JTAG image for boards with 2GB NAND

OpenWrt built from 14.08 branch r784:

Cumulative change summary:

  • Bootloader: U-Boot SPL 2015.04-g19dcb8c (Oct 27 2015 - 14:14:44)
    • imx: ventana: show board temp on boot
    • pmic: ltc3676: add regulator config function
    • use continuous PWM mode and 1MHz for LTC3676 PMIC regulators
    • Revert "imx: ventana: bump 1GHz ARM voltage rail for GW53xx" (no longer needed when using ldo-enabled and continuous PWM mode in PMIC)
    • enable ldo-bypass mode on compatible kernels if ldobypass env set
    • export backlight gpio after gpio driver is available
    • default pci to disabled in bootloader (to improve PCI link and enumeration reliability in the kernel)
    • update watchdog config for GW53xx
    • fix UHS-I detect for GW522x variants
  • OpenWrt: OpenWrt r42297 (2014-08-25 14:50:49 -0700)
    • Ventana: Fix microSD on new revision hardware
4 edited

Changeset view not shown, since the total size (162.7 MB) exceeds 9.5 MB

Note: See TracChangeset for help on using the changeset viewer.