Changes between Initial Version and Version 1 of alternateconnectors

Timestamp:

10/22/2017 05:28:45 AM (7 years ago)

Author:

trac

Comment:

--

alternateconnectors

@@ +1 @@
+[[PageOutline]]
+= Connector and Cable Information = 
+
+Gateworks provides alternate connectors for specific items on the SBC. These alternate connectors are typically used for rugged applications where a more flat profile or locking connector is needed.
+
+== Power Connectors ==
+
+Gateworks typically loads a 2.5mm barrel jack connector for power however most boards include alternate holes for 0.156"/3.96mm spaced power connectors. Here is a list of common connectors that Gateworks stocks. Contact support for more information on having your board loaded with one of these alternate connectors. 
+
+ * Molex Vertical (locking, non-shrouded)-GW#02050506:
+  * [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=26-60-4020]
+[[Image(26-60-4020.jpg)]]
+
+ * AMP/Tyco Horizontal (locking, non-shrouded)-GW#02050194:
+  * [http://www.digikey.com/product-search/en?pv88=2&k=640389-2&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25]
+[[Image(640389-2.jpg)]]
+
+ * JST Vertical (locking, shrouded)-GW#02050561:
+  * [http://www.digikey.com/product-search/en?vendor=0&keywords=B2P-VH-FB-B%28LF%29%28SN%29]
+[[Image(B2P-VH-FB-B.jpg)]]
+
+ * JST Horizontal (locking, non-shrouded)-GW#02050680:
+  * [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B2PS-VH(LF)(SN)]
+[[Image(B2PS-VH.jpg)]]
+
+== Ethernet Connectors ==
+Ethernet requires 8 pins for gigabit and 4 pins for 10/100.
+
+We typically use a 2x4 connector with 2mm spacing and through-hole.
+ * JST 8 pin right angle- Shrouded GW#02050686
+  * S08B-PUDSS-1(LF)(SN) 
+  * Digi-Key Part Number: 455-2485-ND [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=S08B-PUDSS-1(LF)(SN) Link Here]
+* JST 8 pin vertical - Shrouded GW#02050649
+  * B08B-PUDSS-1(LF)(SN) 
+  * Digi-Key Part Number: 455-2485-ND [http://www.digikey.com/product-search/en?vendor=0&keywords=B08B-PUDSS-1%28LF%29%28SN%29 Link Here]
+
+  * Samtec 8 pin right angle header - Shrouded GW#02050737
+   * T2M-104-01-L-D-RA-WT
+  * Laguna GW2380/GW2382 - 8 Pin GW !#02050633
+   * Molex      53261-0871      
+   * Digi-Key Corporation       WM7626DKR-ND/WM7626CT-ND
+=== Ventana Alternate Ethernet Connector ===
+[[Image(ventana-alternate-ethernet.jpg,200px)]]
+
+=== GW5100 Alternate Ethernet Connector ===
+The RJ45 Ethernet connector on the GW5100 can be replaced with an 8-pin pico-Molex connector. 
+ * Part Number Molex 0532610871
+ * Digi-Key Part Number: WM7626TR-ND [http://www.digikey.com/product-detail/en/molex-llc/0532610871/WM7626TR-ND/699100 Link Here]
+
+
+== USB Connectors == 
+
+USB is typically 8 pins and SMT.
+
+ * USB Host - 8 pin Vertical Shrouded 2x4x2MM
+  * Molex 87832-0810
+  * GW 02050611
+  * [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=87832-0810 Digi-Key]
+
+ * USB OTG (Ventana) - Vertical Latching - 1X4X1.25MM
+  * Hirose DF13-4P-1.25DSA
+  * GW 02050699
+  * 1X4X1.25MM
+
+
+
+== JTAG / 2x5 10 Pin Connectors ==
+
+This is a 10 pin small header. (2X5X0.05IN,1.75A,HEADER)
+
+Cables are available for purchase here: [http://shop.gateworks.com/index.php?route=product/product&path=70_80&product_id=24]
+
+Cables made use:
+Samtec  FFSD-05-D-03.00-01-N
+
+The connector on the board itself:
+Samtec  FTSH-105-01-L-DV-K-A
+
+== Peripheral Adapters ==
+ * See the following for Ventana breakout adapters: [wiki:ventana/breakoutadapters#VentanaCableConnectorInformation Ventana Peripheral Adapters]
+
+
+= Ventana Cable Connector Information = 
+
+The Ventana boards use a variety of JST 2mm spacing connectors for the different I/O ports (RS232, CAN, DIO, video, analog, tamper, etc.). Mates to these connectors can be purchased at Digikey. Here is the info for the various connectors:
+
+
+== JST 1x2 (2mm spacing) ==
+
+
+Gateworks Online Shop 2 pin to bare leads: 
+ *  http://shop.gateworks.com/index.php?route=product/product&product_id=185&search=jst
+
+Gateworks Online Shop 2 pin to 2 pin: 
+ * http://shop.gateworks.com/index.php?route=product/product&product_id=61&search=jst
+
+Onboard Connector
+ * http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B02B-PASK-1(LF)(SN)
+
+Mate Connector Housing
+ * http://www.digikey.com/product-detail/en/PAP-02V-S/455-1486-ND/759974
+
+Mate Crimps (note – see associated products under the connector housing for other crimp options)
+ * http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809
+
+ 
+
+== JST 1x3 (2mm spacing) ==
+
+Gateworks Online Shop 3 pin to bare leads: 
+ *  http://shop.gateworks.com/index.php?route=product/product&product_id=186&search=jst
+
+Onboard Connector
+ * http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B03B-PASK-1(LF)(SN)
+
+Mate Connector Housing
+ * http://www.digikey.com/product-detail/en/PAP-03V-S/455-1487-ND/759975
+
+Mate Crimps (note – see associated products under the connector housing for other crimp options)
+ * http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809
+
+== JST 1x4 (2mm spacing) ==
+
+Please see DigiKey and User Manual.
+
+Gateworks Online Shop 4 pin to RJ45 (could be cut)
+ * http://shop.gateworks.com/index.php?route=product/product&product_id=19&search=jst
+
+== JST 1x5 (2mm spacing) ==
+
+Gateworks Online Shop 5 pin to bare leads
+ * http://shop.gateworks.com/index.php?route=product/product&product_id=187&search=jst
+
+Gateworks Online Shop 5 pin to 5pin
+ * http://shop.gateworks.com/index.php?route=product/product&product_id=142&search=jst
+Onboard Connector
+ * http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B05B-PASK-1(LF)(SN)
+
+Mate Connector Housing
+ * http://www.digikey.com/product-detail/en/PAP-05V-S/455-1489-ND/759977
+
+Mate Crimps (note – see associated products under the connector housing for other crimp options)
+ * http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809
+
+== JST 1x6 (2mm spacing) ==
+Often used for SPI, a 6-pin header in a 1x6 configuration with 2mm spacing. 
+
+Onboard Connector
+ * JST B06B-PASK-1(LF)(SN)
+
+Mate Connector Housing
+ * The mating connector is a JST PAP-06V-S, available from Digi-Key as part number 455-1490-ND.
+
+Mate Crimps (note – see associated products under the connector housing for other crimp options)
+ * The mating connector pins are JST SPHD-002T-P05, available from Digi-Key as part number 455-1313-1-ND.
+
+
+
+
+= GW5510 30-pin Connector =
+
+
+The 30 pin J3 connector information is listed in the manual as a Samtec SFSD series. ( The GW16111 is a development adapter).
+
+Rated up to 2.9A per pin.
+
+There is no single direct part number because the wiring gauge will differ for each customer, etc. There are many options.
+
+Document from Samtec:
+ * [http://suddendocs.samtec.com/catalog_english/sfsd.pdf]
+
+Samples may be available on the following link here:
+[https://www.samtec.com/technical-specifications/default.aspx?seriesMaster=SFSD]
+
+Example Digikey link:
+[http://www.digikey.com/product-search/en?k=sfsd-15&mnonly=0&newproducts=0&ColumnSort=-1000011&page=1&stock=0&pbfree=0&rohs=0&quantity=&ptm=0&fid=0&pageSize=25]
+ 
+= GW5100 and GW5520 Peripheral Connectors / 2x5 10 Pin Connectors =
+
+This is a 10 pin small header. (2X5X0.05IN,1.75A,HEADER)
+
+Cables are available for purchase here: [http://shop.gateworks.com/index.php?route=product/product&path=70_80&product_id=24]
+
+Cables made use:
+Samtec  FFSD-05-D-03.00-01-N
+
+The connector on the board itself:
+Samtec  FTSH-105-01-L-DV-K-A
+
+
+= GW16112 USB Expansion Board Connector Information =
+
+Gateworks sells an accessory cable pre-made here: [http://shop.gateworks.com/index.php?route=product/product&product_id=193 GW10102 USB Cable]
+
+The connector on our board is: 
+
+CONT,90DEG,MICRO-LOCK,1X4X1.25MM,SHRD 
+
+Molex   504195-0470
+
+[http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=504195-0470]
+
+The mating connector on digi-key is being shown as: 
+Molex 504193-0400
+
+[http://www.digikey.com/product-detail/en/5041930400/WM10575-ND/4879321]
+
+= GW16113 Expansion Card Cable Information =
+The GW16113 is a Mini-PCIe I/O Card. Gateworks has produced a pre-made cable, GW10103.
+
+There are 3 connectors on the card for signalling, all connectors are the same.
+
+Connector Shell
+ * Molex 504193-1000
+
+Connector Terminals
+ * Molex 504185-1000
+
+[[Image(gw10103mechanical.png,300px)]]
+
+[[Image(gw10103actual.jpg,300px)]]