Changes between Version 8 and Version 9 of alternateconnectors


Ignore:
Timestamp:
05/06/2019 05:05:47 PM (2 months ago)
Author:
Ron Eisworth
Comment:

Added more info on GW5510 connector.

Legend:

Unmodified
Added
Removed
Modified
  • alternateconnectors

    v8 v9  
    176176= GW5510 30-pin Connector =
    177177
    178 
    179 The 30 pin J3 connector information is listed in the manual as a Samtec SFSD series. ( The GW16111 is a development adapter).
    180 
    181 Rated up to 2.9A per pin.
     178The GW5510/GW5514 uses a 30-pin expansion header for access to the I/O signals. A Samtec TFM-115-22-L-D-A-TR connector is used on the board for this header. Samtec has both board to board and board to cable options for this connector. For board to board the mating board should use a Samtec SFM-115-02-L-D-A-TR. See the GW16111 Expansion board as an example break out board for the GW5510: http://www.gateworks.com/product/item/ventana-gw16111-expansion-adapter
     179
     180For board to cable options the Samtec SFSD series can be used. Pins are rated up to 2.9A per pin.
    182181
    183182There is no single direct part number because the wiring gauge will differ for each customer, etc. There are many options.