= Introduction to QT in Buildroot An embedded solution may require a custom graphical interface. Buildroot and QT makes for an efficient lightweight solution. This guide will walk you through the necessary steps to create a bootable media containing Buildroot and the QT5 Cinematic Experience. With little adaptation this information can be used to create file systems which support a gamut of QT applications. - https://github.com/rzr/qt5-cinematic-experience (webpage) - https://www.youtube.com/watch?v=kBNelaiCJZg (youtube video) = Building the demo == Recommended hardware - GW54xx - HDMI monitor - Mini HDMI cable to HDMI (for connecting the board and monitor together) - MicroSD card - Power cables - Ethernet ** Optionally a different board or video periperhal can be used, this will require adapting the instructions below appropreately. ** == Creating Buildroot tarball Clone buildroot: {{{#!bash git clone https://github.com/buildroot/buildroot.git }}} Download and apply the [http://trac.gateworks.com/attachment/wiki/buildroot/QT/0001-add-Gateworks-Ventana-Qt5-Cinematic-Experience-demo-.patch patch] which is attached to this page: {{{#!bash git am 0001-add-Gateworks-Ventana-Qt5-Cinematic-Experience-demo-.patch }}} This config file will create a build config which enables the necessary QT components, the demo we will be testing, a custom kernel version of 5.4.0, and GW54xx deivce trees, among other things. Make adaptations as necessary for the hardware you have on hand and which ever kernel version you find most appropriate, though you will want to use one with hardware acceleration support. The other file that will be created by the patch will appear in the /root directory and will be used for configuring QT once in userspace. ** Compiling: Ensure your build is clean. {{{#!bash make distclean }}} Load the config created by the patch. {{{#!bash make imx6-gwventana-gt5_defconfig }}} Build buildroot. {{{#!bash make }}} Verify the output file is present. {{{#!bash ls output/images/rootfs.tar }}} Follow the instructions on [wiki:/linux/blockdev this page] to create a bootable block storage device using the created tarball. = Running the Demo Login as "root" Export EGLFS video mode settings: {{{#!bash export QT_QPA_EGLFS_KMS_CONFIG=/root/ventana.json export QT_QPA_EGLFS_ALWAYS_SET_MODE=1 }}} Execute the demo: {{{#!bash /usr/share/Qt5/CinematicExperience/Qt5_CinematicExperience }}} = Conclusion This concludes how to build and install the QT5 Cinematic Experience demo in buildroot. Using "make menuconfig" many different QT applications can be build into buildroot, enjoy experimenting with these various packages.