wiki:buildroot/qt

Version 5 (modified by Tim Harvey, 4 weeks ago) (diff)

added notes for large flash geometry

Introduction to Qt in Buildroot

An embedded solution may require a custom graphical interface. Buildroot and Qt makes for an efficient lightweight solution.

This guide will walk you through the necessary steps to create a bootable image containing various demos:

Building the demo image

Recommended hardware

  • Ventana board with HDMI output
  • 1080p HDMI monitor (edit /root/ventana.json to change the resolution)
  • Mini HDMI cable to HDMI (for connecting the board and monitor together)
  • Power cables

Building

Procedure:

# clone buildroot
git clone https://github.com/buildroot/buildroot.git
# fetch and apply patch that adds ventana defconfig files
wget http://trac.gateworks.com/raw-attachment/wiki/buildroot/qt/0001-add-support-for-Gateworks-Ventana-defconfig-qt5-defc.patch
git am .patch
# build the gwventana-qt5 image
make distclean
make imx6-gwventana-qt5_defconfig
make
ls output/images/

The patch adds the following:

  • board/gateworks/ventana/rootfs_overlay/etc/profile.d/qt.sh - set Qt env vars
  • board/gateworks/ventana/rootfs_overlay/root/ventana.json - Qt screen config for LVDS disabled and 1080p HDMI (modify /root/ventana.json to your needs)
  • configs/imx6-gwventana-qt5_defconfig - defconfig for qt5
  • configs/imx6-gwventana_defconfig - defconfig for console image

You can use the following filesystem images:

  • output/images/rootfs.ubi for 2K page size flash geometries (256MB flash or newer 2GiB flash parts)
    • if you are looking for a ubi image suitable for 4K page size flash geometries (the Micron 2GiB part) change the following via menuconfig:
      BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x3e00
      BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x1000
      BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=8192
      BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x40000
      BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
      
  • output/images/rootfs.tar - refer to this page to create a bootable block storage device using the created tarball
  • output/images/sdcard.img - disk image suitable for copying to a removalbe block storage device (see linux/blockdev)

Running the Demos

Login as "root"

Example Demos:

  • glmark2 - an OpenGL 2.0 and ES2.0 benchmark:
    glmark2-es2-drm
    
  • kmscube - a demonstration program showing how to drive bare meta graphics via DRM/KMS/GMB and EGL:
    kmscube -D /dev/dri/card1
    
  • gstreamer:
    gst-launch-1.0 videotestsrc ! kmssink
    
  • Qt5 applications:
    /usr/share/Qt5/CinematicExperience/Qt5_CinematicExperience
    

Conclusion

This concludes how to build and install the Qt5 Cinematic Experience demo in buildroot. Using "make menuconfig" many different Qt applications can be build into buildroot, enjoy experimenting with these various packages.

Attachments (1)

Download all attachments as: .zip