Version 1 (modified by trac, 5 months ago) (diff)


Gateworks Cambria GW2350

The GW2350 is a member of the Gateworks Cambria Network Processor family. This network processor consists of an Intel IXP435 XScale operating at 667MHz, 128Mbytes of DDRII-400 SDRAM, and 32Mbytes of Flash. Peripherals include a Type III Mini-PCI socket, two 10/100 Base-TX Ethernet ports with IEC-6100-4 ESD and EFT protection, and two USB Host ports. Additional features include digital I/O, serial EEPROM, system monitor to track operating temperature and input voltage, and watchdog timer. The GW2350 also supports GPS and RS485 serial as ordering options. Power is optionally applied through an auxiliary latching connector or through either Ethernet connector with the unused signal pairs in a passive power over Ethernet architecture. An RS232 serial port is available through the JTAG connector using a Gateworks GW16027 JTAG Serial Port Adapter or a Gateworks GW16042 USB JTAG Programmer. A board support package is included for Linux 2.6 operating systems. Features:

  • Intel XScale IXP435 667MHz Processor
  • 128Mbytes DDRII-400 SDRAM Memory
  • 32Mbytes Flash Memory
  • One Type III Mini-PCI Socket
  • Two 10/100 Base-TX Ethernet Ports
  • Two v2.0 Host USB Ports
  • Digital I/O Control and Monitoring
  • 1Kbyte Serial EEPROM
  • Voltage and Temperature Monitor
  • IXP Processor Watchdog Timer
  • JTAG Programming and Serial Console Port
  • Passive Power Over Ethernet
  • Reverse Voltage and Transient Protection
  • 8 to 48VDC Input Voltage Range
  • 8W Mini-PCI Socket Power
  • 5W Typical Operating Power
  • -40°C to 85°C Operating Temperature
  • Linux 2.6 Board Support Package
  • 1 Year Warranty
  • Optional GPS and RS485 Serial Port

Useful Information

Gateworks has created a list of information that we have deemed useful to anybody looking to become familiar with the GW2350 or looking for development information on the GW2350. A list of this information has been provided below.