Changes between Version 1 and Version 2 of expansion/gw16103


Ignore:
Timestamp:
05/21/2019 09:29:46 PM (2 months ago)
Author:
Ryan Erbstoesser
Comment:

add clarification for microsd

Legend:

Unmodified
Added
Removed
Modified
  • expansion/gw16103

    v1 v2  
    1818Note that the embedded micro-SD reader/writer is the first enumerated device on the bus, thus if you want to boot off of a USB Mass Storage device connected to the GW16103 you will need to alter the default bootloader scripts - see [wiki:ventana/bootloader#bootorder here] for details.
    1919
    20 Because the GW16103 uses the PERST# signal as reset, PCI must be enabled in the bootloader in order to de-assert the card's reset. This can be accomplished by clearing pcidisable:
     20Because the GW16103 uses the PERST# signal as reset, PCI must be enabled in the bootloader in order to de-assert the card's reset. This can be accomplished by clearing pcidisable. Run the following commands in the bootloader:
    2121{{{
    2222setenv pcidisable