Changes between Version 15 and Version 16 of expansion/gw16126

Timestamp:

01/10/2019 12:00:32 AM (5 years ago)

Author:

Ryan Erbstoesser

Comment:

add info for hologram sim

expansion/gw16126

@@ -255 +255 @@
 
 === CAT M1 SIM Support ===
-Note that the CAT M1 modem requires a CATM1 SIM from the carriers. These SIMs are typically different than the standard LTE SIMs (used in your phone). The following Verizon SIM has been tested and is available [https://www.digikey.com/products/en?keywords=1477-1051-ND here]. '''Note''' this SIM will not automatically work with the GW16126 because the GW16126 is not end device certified with Verizon. Customers will need to work with their particular cellular carrier to get test SIMs that will work properly with the modem. Certification should also be discussed at the same time.
+Note that the CAT M1 modem may require a CATM1 SIM from the carriers. These SIMs are typically different than the standard LTE SIMs (used in your phone) but depends on the provider.
+
+Gateworks has tested and recommends at this time a SIM from Hologram. The Hologram SIM does not have to be specific to CATM1. Obtain a SIM here: [https://hologram.io/]
+
+ 
+The following Verizon SIM has been tested and is available [https://www.digikey.com/products/en?keywords=1477-1051-ND here]. '''Note''' this SIM will not automatically work with the GW16126 because the GW16126 is not end device certified with Verizon. Customers will need to work with their particular cellular carrier to get test SIMs that will work properly with the modem. Certification should also be discussed at the same time.
 
 One may also want to disable system updates that may run in the background on the OS that is being used to avoid any overages on the SIM data plan.