Changes between Version 51 and Version 52 of expansion/gw16126

Timestamp:

07/23/2020 02:28:14 PM (4 years ago)

Author:

Tim Harvey

Comment:

updated software support sections

expansion/gw16126

@@ -131 +131 @@
  * LTE Cat-M1 modem:
   - Linux 4.17+ kernel with option driver (CONFIG_USB_SERIAL_OPTION) and qmi driver (CONFIG_USB_NET_QMI_WWAN)
-   * Linux 4.5+ needed for QMI RAW IP support (unless backported)
-   * Linux 4.17+ needed for ublox R410M (unless backported)
- 
-
-Ubuntu:
- - LTE Cat-M1 modem: requires network-manager modemmanager libqmi
- - BLE HCI: requires bluez
- - Fully supported (with the above)
-
-OpenWrt 18.6.x:
- - requires kmod-usb-net-opton, kmod-usb-net-qmi-wwan, kmod-usb-serial, kmod-usb-serial-ftdi, kmod-usb-serial-qualcomm, kmod-bluetooth, kmod-crypto-user, kmod-crypto-hash, bluez-daemon, uqmi
- - fully supported (with the above)
-
-OpenWrt 16.02:
- - will not work without backporting qmi raw-ip support and modem ID's to option1/qmi-wwan driver
 
 The modem features a Qualcomm chipset that uses the 'option' and 'qmi_wwan' Linux drivers providing the following devices:
@@ -153 +138 @@
  * /sys/class/net/wwan0 (net)
 
-The modem is supported by Linux !ModemManager and libqmi-utils.
+Ubuntu:
+ - Fully supported with network-manager modemmanager libqmi
+
+OpenWrt 20.06:
+ - Fully supported (kmod-usb-net-opton, kmod-usb-net-qmi-wwan, kmod-usb-serial, kmod-usb-serial-ftdi, kmod-usb-serial-qualcomm, kmod-bluetooth, kmod-crypto-user, kmod-crypto-hash, bluez-daemon, uqmi)
 
 General modem information that should be understood is located on the [wiki:wireless/modem Gateworks Modem Wiki Page]
@@ -759 +748 @@
 
 This is supported with the following:
- * Gateworks Ubuntu focal/binoic pre-built images
- * Gateworks OpenWrt 20.06/18.0x/16.02
+ * Gateworks Ubuntu focal/bionic pre-built images
+ * Gateworks OpenWrt 20.06/18.0x/16.02 (bluez-daemon package)
 
 Examples: