Changes between Version 7 and Version 8 of gettingstarted


Ignore:
Timestamp:
04/03/2020 06:39:40 PM (3 years ago)
Author:
Ryan Erbstoesser
Comment:

statement about 5910

Legend:

Unmodified
Added
Removed
Modified
  • gettingstarted

    v7 v8  
    2828== Power ==
    2929 * Most Gateworks' boards support voltages between 10VDC - 48VDC. Please consult the operating manual.
    30  * If a development kit was purchased, a 12V or 24V DC Wall supply is included that will connect to the power connector barrel jack on the GateworksSBC.
     30 * If a development kit was purchased, a 12V or 24V DC Wall supply is included that will connect to the power connector barrel jack on the GateworksSBC. *** Note on the GW5910, please only use the power supply with the PoE Injector ***
    3131 * Some boards require a 2 pin specialty connector. Silkscreen labels are often labeled VIN for voltage input.
    3232 * POE is possible on certain models.  802.3af is available on certain models.  Passive POE between 10-48VDC is often supported.  Please consult the user manual. [wiki:poe POE Information]