Changes between Version 5 and Version 6 of jtag


Ignore:
Timestamp:
03/19/2018 06:09:39 PM (5 years ago)
Author:
Ron Eisworth
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • jtag

    v5 v6  
    77Gateworks has two models of JTAG programmers:
    88
    9 GW16042 which contains a 14-pin, 0.1" connector for Avila/Cambria/Laguna(GW2387, GW2388, GW2391) boards.
     9'''GW16042''' - uses 14-pin, 0.1" connector for Avila/Cambria/Laguna(GW2387, GW2388, GW2391) boards.
    1010
    11 GW16099 which contains a 10-pin, 0.05" connector for Laguna(GW2380, GW2382, GW2383)/Ventana/Newport boards.
     11'''GW16099''' - uses 10-pin, 0.05" connector for Laguna(GW2380, GW2382, GW2383)/Ventana/Newport boards.
    1212
    13 Both of these programmers uses an FTDI FT2232D which has two general purpose 8-bit ports.  The 1st port is configured for JTAG and utilizes the FTDI MPSSE engine. The 2nd port is configured for serial and used for the Serial Console.
     13Both of these programmers uses the FTDI [http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232D.pdf FT2232D ] which has two general purpose 8-bit ports.  The 1st port is configured for JTAG and utilizes the FTDI MPSSE engine. The 2nd port is configured for serial and used for the Serial Console.
    1414
    1515== GW16042 JTAG dongle ==