Changes between Version 38 and Version 39 of malibu/gw3089gblade

Timestamp:

04/20/2023 03:15:51 PM (13 months ago)

Author:

Ron Eisworth

Comment:

--

malibu/gw3089gblade

@@ -276 +276 @@
 See the following instructions for installing individual Gblades into the 1U frontplate:
 
-
-
-
-
+ 1. Remove the four frontplate screws using a T8 Torx driver. 
+ 2. Remove the LED cable from the frontplate. Note the LED has a rear socket and a front lens. Gently pull the rear socket to separate from the front lens. Note there is a small rubber washer on the front lens which should be removed when installing in the thicker metal 1U frontplate.  
+ 3. Move the unit to behind the 1U plate in the location that it will be installed and re-attach the LED cable by inserting the LED lens from the front side and pushing the socket onto it from the rear.  
+ 4. Attach the unit to the 1U frontplate using the four Torx screws that held the original frontplate. 
 
 == Wireless & Modems