Changes between Version 2 and Version 3 of newport/DigitalIO

Timestamp:

10/04/2018 10:22:41 PM (6 years ago)

Author:

Tim Harvey

Comment:

fix linux gpio mapping

newport/DigitalIO

@@ -13 +13 @@
 Newport GPIO Mapping:
 ||= Board =||= DIO^^^1^^^ =||= Connector^^^2^^^ =||= CN80XX GPIO^^^3^^^ =||= Linux gpio ^^^4^^^ =||= Termination^^^5^^^ =||= Notes^^^6^^^ =||
-|| GW640x     || DIO0         || J15.1  || GPIO_24 || gpio-464 || RC/TVS termination || ||
-||            || DIO1         || J15.2  || GPIO_25 || gpio-465 || RC/TVS termination || ||
-||            || DIO2         || J15.3  || GPIO_26 || gpio-466 || RC/TVS termination || ||
-||            || DIO3         || J15.4  || GPIO_27 || gpio-467 || RC/TVS termination || build option exists to route to a 0-5V ADC ||
+|| GW640x     || DIO0         || J15.1  || GPIO_24 || gpio-488 || RC/TVS termination || ||
+||            || DIO1         || J15.2  || GPIO_25 || gpio-489 || RC/TVS termination || ||
+||            || DIO2         || J15.3  || GPIO_26 || gpio-490 || RC/TVS termination || ||
+||            || DIO3         || J15.4  || GPIO_27 || gpio-491 || RC/TVS termination || build option exists to route to a 0-5V ADC ||
 ||            || GND          || J15.5  || - || - || || ||
 ||||
-|| GW630x     || DIO0         || J13.1  || GPIO_24 || gpio-464 || RC/TVS termination || ||
-||            || DIO1         || J13.2  || GPIO_25 || gpio-465 || RC/TVS termination || ||
-||            || DIO2         || J13.3  || GPIO_26 || gpio-466 || RC/TVS termination || ||
-||            || DIO3         || J13.4  || GPIO_27 || gpio-467 || RC/TVS termination || build option exists to route to a 0-5V ADC ||
+|| GW630x     || DIO0         || J13.1  || GPIO_24 || gpio-488 || RC/TVS termination || ||
+||            || DIO1         || J13.2  || GPIO_25 || gpio-489 || RC/TVS termination || ||
+||            || DIO2         || J13.3  || GPIO_26 || gpio-490 || RC/TVS termination || ||
+||            || DIO3         || J13.4  || GPIO_27 || gpio-491 || RC/TVS termination || build option exists to route to a 0-5V ADC ||
 ||            || GND          || J13.5  || - || - || || ||
 ||||
-|| GW620x     || DIO0         || J10.1  || GPIO_24 || gpio-464 || RC/TVS termination || ||
-||            || DIO1         || J10.2  || GPIO_25 || gpio-465 || RC/TVS termination || ||
-||            || DIO2         || J10.3  || GPIO_26 || gpio-466 || RC/TVS termination || build option exists to route to a 0-5V ADC ||
+|| GW620x     || DIO0         || J10.1  || GPIO_24 || gpio-488 || RC/TVS termination || ||
+||            || DIO1         || J10.2  || GPIO_25 || gpio-489 || RC/TVS termination || ||
+||            || DIO2         || J10.3  || GPIO_26 || gpio-491 || RC/TVS termination || build option exists to route to a 0-5V ADC ||
 ||            || DIO3         || J10.4  || GPIO_27 || gpio-467 || RC/TVS termination || build option exists to route to GSC User PB or Tamper ||
 ||            || GND          || J10.5  || - || - || || ||
 ||            || VDD_3P3      || J10.6  || - || - || - || 1.0Amax; build option exists to route to VDD_5P0 ||
 ||||
-|| GW610x     || DIO0         || J10.19 || GPIO_24 || gpio-464 || R termination || ||
-||            || DIO1         || J10.20 || GPIO_25 || gpio-465 || R termination || ||
-||            || DIO2         || J10.17 || GPIO_26 || gpio-466 || R termination || ||
-||            || DIO3         || J10.18 || GPIO_27 || gpio-467 || R termination || ||
+|| GW610x     || DIO0         || J10.19 || GPIO_24 || gpio-488 || R termination || ||
+||            || DIO1         || J10.20 || GPIO_25 || gpio-489 || R termination || ||
+||            || DIO2         || J10.17 || GPIO_26 || gpio-490 || R termination || ||
+||            || DIO3         || J10.18 || GPIO_27 || gpio-491 || R termination || ||
 ||            || GND          || J10.2/4/6 || - || - || || ||
 ||            || VDD_3P3      || J10.1/3   || - || - || || 1.0A max ||