[[PageOutline]]

= Newport Board Support Package (BSP) =
Gateworks provides a Board Support Package for Newport which provides source code and an easy mechanism to build different images, including Ubuntu and OpenWrt.

Gateworks uses the term 'BSP' to describe one 'image' file, that contains everything, including all boot firmware, operating system (rootfs and kernel). 

The Gateworks BSP is the easiest comprehensive software process because it contains everything. If a deep dive, expert path is desired, each piece of the BSP (boot firmware, rootfs, kernel) can all be built separately. 

 * [#kernel Gateworks Newport Linux Kernel]
 * [wiki:newport/boot Gateworks Newport Boot Firmware]

[=#images]
== BSP Pre-Built Firmware Images ==

Pre-built firmware images can be found on http://dev.gateworks.com/newport.

A sampling includes:

 * ''' Entire Board Software (recommended), including boot firmware, bootloader, OS, kernel, etc: '''
  * [http://dev.gateworks.com/newport/images/ Newport Images] - Compressed Disk Image containing Firmware and kernel and OS (.img.gz files)
   * Ubuntu & !OpenWrt
 * ''' Newport GSC '''
  * [http://dev.gateworks.com/newport/images/gsc_630x.txt GSC firmware image]
 * '''Only Boot Firmware '''
  * [http://dev.gateworks.com/newport/boot_firmware/firmware-newport.img firmware-newport.img] - Boot Firmware (everything up to and including the bootloader stored on the embedded FLASH boot device) (see [wiki:newport/boot newport/boot] for details)
 * '''Only Newport Kernel '''
  * [http://dev.gateworks.com/newport/kernel/linux-newport.tar.xz linux-newport.tar.xz] - Compressed TAR archive of pre-built Linux kernel

''' Installation ''' instructions are at the following URL: [wiki:/newport/firmware#UpdateFirmwareviaSerialConsoleandEthernetfromBootloader Newport Flashing Instructions] 

[=#source]
== BSP Source Code ==
Newport Source code for the firmware, bootloader and kernel are hosted at !GitHub. We highly recommend you create a !GitHub account and 'Watch' these repositories to keep abreast of important feature additions, bugfixes, and firmware-releases. You can configure your !GitHub account to e-mail you when changes are made to repositories [https://github.com/settings/notifications here].

The following !GitHub repos are used for Newport:
 * [https://github.com/Gateworks/bsp-newport] - Newport BSP support scripts and Makefile  ([https://github.com/Gateworks/bsp-newport/subscription watch])
 * [https://github.com/Gateworks/manifest-newport] - Newport BSP repo Manifest  ([https://github.com/Gateworks/manifest-newport/subscription watch])
 * [https://github.com/Gateworks/uboot-newport uboot-newport] - Newport Bootloader ([https://github.com/Gateworks/uboot-newport/subscription watch)]
 * [https://github.com/Gateworks/linux-newport linux-newport] - Newport Linux Kernel ([https://github.com/Gateworks/linux-newport/subscription watch)]
 * [https://github.com/Gateworks/dts-newport dts-newport] - Newport Linux Device-Tree ([https://github.com/Gateworks/dts-newport/subscription watch)]
 * [https://github.com/Gateworks/bdk-newport bdk-newport] - Newport BDK (used as Secondary Program Loader) ([https://github.com/Gateworks/bdk-newport/subscription watch)]
 * [https://github.com/Gateworks/atf-newport atf-newport] - Newport ATF (ARM Trusted Firmware) ([https://github.com/Gateworks/atf-newport/subscription watch)]
 * [https://github.com/Gateworks/openwrt openwrt] - Gateworks OpenWrt ([https://github.com/Gateworks/openwrt/subscription watch)]


[=#build]
== Building the BSP from source ==
Below are instructions for building the entire BSP, which includes all of the bootloader components and Linux kernel and Ubuntu or OpenWrt.  Pre-built images are available [#images above].

The Gateworks Newport Board Support Package uses the Google {{{repo}}} tool to manage multiple code repositories.

The following pre-requisites are needed to build the Newport BSP:
 * Linux Development host (desktop or laptop computer) (Ubuntu 16.04 is used by Gateworks and tested)
 * Python 2.x (required by the 'repo' tool and imaging tools)
 * Git (used for source code repositories)
 * repo (used to manage multiple git repos)
 * libssl-dev (used for signing images)

Installing pre-requisites:
{{{#!bash
sudo apt-get install build-essential git python repo libssl-dev
}}}

To obtain the code:
 1. Initialize repo (fetch the repo manifest)
{{{#!bash
mkdir $HOME/newport
cd $HOME/newport
repo init -u https://github.com/Gateworks/manifest-newport.git
}}}
 1. Sync repositories (repeat this when you want to fetch the latest code updates)
{{{#!bash
repo sync
}}}
  * This will fetch/update the source repos described [#source above]. The first time it can take several minutes depending on your Internet connection and will take approximately ~2.5GB of disk space
 1. Setup build environment (***repeat this each time you open shell***)
{{{#!bash
source newport/setup-environment
}}}
 1. Build desired software target as definied below. For example:
{{{#!bash
make -j8 openwrt-image # build openwrt-newport.img.gz or change to any of below build targets
}}}

The '''build targets''' supported by the Newport BSP include:
  * **ubuntu-image** - builds ubuntu-newport.img.gz: A Compressed Disk Image which includes the 16MB [wiki:newport/boot Boot Firmware] (BDK/ATF/U-Boot and Device-Tree images) as well as the Kernel and Ubuntu root filesystem. 
   * [wiki:newport/firmware#serial-ethernet-uboot Installation Instructions]
  * **openwrt-image** - builds openwrt-newport.img.gz: A Compressed Disk Image which includes the 16MB [wiki:newport/boot Boot Firmware] (BDK/ATF/U-Boot and Device-Tree images) as well as the !OpenWrt Kernel and root filesystem
   * [wiki:newport/firmware#serial-ethernet-uboot Installation Instructions]
  * **firmware-image** - builds 'firmware-newport.img': 16MB [wiki:newport/boot Boot Firmware] which includes the BDK/ATF/U-Boot and Device-Tree images - (takes about 2 mins on a modern development system).
  * **kernel_image** - builds linux-newport.tar.xz - A compressed tarball of the kernel (boot/Image) and kernel modules (lib/modules/*) which can be used on top of any compatible root filesystem 

 General installation instructions: 
  * [wiki:newport/firmware Flashing / Updating software on Newport SBC]
  * [wiki:/newport/boot#BuildingaBootableDiskImages Creating Entire Disk Images for Booting]

[=#kernel]
== Building or Modifying the stand-alone Linux Kernel for Newport Ubuntu
The Gateworks Newport BSP instructions [#build above] create an environment for building the Linux kernel among other targets.

Some additional instructions for common actions (make sure you have already installed the BSP and setup your shell environment as specified above):
 * Make standard Gateworks Newport kernel with Gateworks newport_defconfig
{{{#!bash
make linux # first build the kernel with the standard newport_defconfig
}}}
 * Modify Kernel configuration (enabling modules etc):
{{{#!bash
make kernel_menuconfig # this will do a 'make menuconfig; make savedefconfig' in the kernel directory
}}}
  - your modified defconfig is now in linux/defconfig if you want to save it away somewhere
 * Build kernel tarball:
{{{#!bash
make kernel_image # builds the kernel and modules and tarball
}}}
 * Build new disk image using the updated kernel tarball:
{{{#!bash
make ubuntu-image
}}}


== Building Ubuntu Operating System - rootfs

You can build an entire Ubuntu image from the BSP noted above (which will boot on a Newport SBC), but it does not include building the isolated rootfs. 

The actual building of the Ubuntu rootfs does not happen in the Gateworks BSP instructions described above. 

Information for manually building Ubuntu rootfs can be found here: [wiki:newport/ubuntu]