Changes between Version 12 and Version 13 of v2x


Ignore:
Timestamp:
07/15/2022 03:37:07 PM (21 months ago)
Author:
Ryan Erbstoesser
Comment:

update 72xx section

Legend:

Unmodified
Added
Removed
Modified

  • v2x

    v12 v13  
    1111The Gateworks Venice GW72xx & GW73xx Single Board Computer (SBC) can be used to host the Unex V2X Radio. The SOM-301x radio requires 5V, 3.3V and USB 2.0. The 3.3V and USB 2.0 are provided by default but the 5V is not. A UART is also required for development. 
    1212
    13 To enable 5V access on the J10 Mini-PCIe slot, the following resistors need to be loaded at the Gateworks factory before ordering:
     13To enable 5V access on the J10 Mini-PCIe slot, the following resistors need to be loaded at the Gateworks factory before ordering. Note that a 100 piece minimum order is required for special configurations.
    1414
    1515GW72xx:
    … …  
    1717  * This enables 5V on pins 3, 5, 45, 47
    1818
    19 The below resistors are for the UART and are by default unloaded on the GW7301 to avoid any conflicts:
     19The below resistors are for the UART and are by default unloaded on the GW72xx to avoid any conflicts:
    2020 * R164, R165 for UART3 (use 02240128) (Pins 17 & 19)
    2121
    … …  
    2525  * This enables 5V on pins 3, 5, 45, 47
    2626
    27 The below resistors are for the UART and are by default unloaded on the GW7301 to avoid any conflicts:
     27The below resistors are for the UART and are by default unloaded on the GW73xx to avoid any conflicts:
    2828 * R104, R103 for UART3 (use 02240128) *Note UART3 is also used for the onboard !WiFi/BLE and will conflict
    2929