Changes between Version 3 and Version 4 of venice/bsp

Timestamp:

12/09/2020 04:16:17 PM (3 years ago)

Author:

Tim Harvey

Comment:

added JTAG binary details

venice/bsp

@@ -22 +22 @@
   * [http://dev.gateworks.com/venice/images/ GSC firmware images]
  * '''Only Boot Firmware '''
-  * [http://dev.gateworks.com/venice/boot_firmware/flash.bin flash.bin] - Boot Firmware (everything up to and including the bootloader stored on the embedded FLASH boot device) (see [wiki:venice/boot venice/boot] for details)
+  - [http://dev.gateworks.com/venice/boot_firmware/flash.bin flash.bin] - Boot Firmware for updating from U-Boot or Linux (everything up to and including the bootloader) (see [wiki:venice/boot venice/boot] for details)
+  - [http://dev.gateworks.com/venice/boot_firmware/u-boot_spl.bin u-boot_spl.bin] - Boot Firmware for updating via JTAG (everything up to and including the bootloader) (see [wiki:venice/boot venice/boot] for details)
+  - [http://dev.gateworks.com/venice/boot_firmware/firmware-venice.bin firmware-venice.bin] - Boot Firmware for updating via JTAG (everything up to and including the bootloader including partition table and default U-Boot env) (see [wiki:venice/boot venice/boot] for details)
  * '''Only Venice Kernel '''
   * [http://dev.gateworks.com/venice/kernel/linux-venice.tar.xz linux-venice.tar.xz] - Compressed TAR archive of pre-built Linux kernel
 
-''' Installation ''' instructions are at the following URL: [wiki:/venice/firmware Venice Flashing Instructions] 
+Installation instructions:
+ - [wiki:/venice/firmware Venice Flashing Instructions for updating from U-Boot or Linux]
+ - [wiki:jtag_instructions JTAG instructions for updating Boot Firmware]