Changes between Version 15 and Version 16 of venice/errata

Timestamp:

12/06/2023 05:28:06 PM (5 months ago)

Author:

Tim Harvey

Comment:

add workaround for VN8

venice/errata

@@ -181 +181 @@
 
 Issue:
-
  * When the rechargeable battery is below 1.8VDC voltage, the GSC may not reset the board properly when in the default configuration which implements a 'cold boot' (power cycle) to perform system resets and reboots. This can result in a SBC that does not power back on.
 
 Workaround:
- 
- * Remove the GSC Battery
-
-Resolution:
-
- * This will be resolved in future hardware revisions. For affected products, a GSC firmware update will be issued in the future. This update is recommended for all Venice board revisions.
-
-Affected Products:
-
+ * Remove the GSC Battery to get the board to power back on
+ * Operate without a GSC battery to avoid the issue, or Update GSC firmware to v64, clear GSC R0.7 (CPU_WDOG_POWERCYCLE) and do not use the GSC sleep capability (ie remove  /lib/systemd/system-shutdown/gsc-poweroff from Ubuntu if you are not using the latest Gateworks Ubuntu release)
+
+Resolution:
+ * This will be resolved in future hardware revisions
+
+Affected Products:
  * GW710x-A/B/C/D
  * GW720x-A/B/C/D/E 
@@ -200 +197 @@
 
 Resolved on:
-
  * GW710x-E (PCB 02210196-04)
  * GW720x-F (PCB 02210197-05)