[[PageOutline]]

= Venice Errata
The below errata only affects certain models and certain revisions.

Please contact support@gateworks.com with any questions.

[=#VN1]
== VN1 eth0 LED's dim

Issue:
 * The Link speed and activity LED's on the eth0 RJ45 are insufficiently illuminated.

Resolution:
 * This is resolved on PCB 02210198-02 (GW730x-C) (Rev C)

Affected Product:
 * GW730x-B (PCB 02210198-01)


[=#VN2]
== VN2: GSC lockup

Issue:
 * An errata in the MSP430FR5847 used as the GSC (GSCv3) for Venice single board computers can cause unexpected GSC lockup events. The effects of a GSC lockup can be described as:
  - failure of board to boot due to inability to read board I2C EEPROM
  - failure to read the I2C RTC and update the system time
  - failure to adjust ARM CPU core voltage regulator during cpu frequency changes
  - loss of RTC and GSC register configuration

Affected Product:
 * GW7xxx

Resolution:
 * Update boards to GSC firmware v60

Fixed in:
 * GSC firmware v60

[=#VN3]
== VN3 PoE Circuit Leakage & Reset

Issue:
 * PoE leakage current can charge up the barrel jack detection circuit (WAD circuit) and shut down the PoE input
  * Add resistor to sink current

Affected Product:
 * GW730x-C (PCB 02210198-02)
 * GW7902x-C (PCB 02210224-02)

Resolution:
 * This is resolved on PCB 02210198-02 (GW730x-C.1) (Rev C.1)
 * This is resolved on PCB 02210224-02 (GW7902-C.1, SP467-C.2 & C.3, SP476-C.1, SP477-C.1, SP481-C.1 ) (Rev C.1)