Changes between Version 5 and Version 6 of venice/firmware

Timestamp:

09/14/2021 06:42:50 PM (4 years ago)

Author:

Cale Collins

Comment:

added notes to describe prebuilt firmware images.

venice/firmware

@@ -17 +17 @@
 = Pre-Built Firmware
 [wiki:venice/bsp#images Venice Pre-Built Firmware / Software]
+
+JTAG binary images
+ - flash with Gateworks JTAG dongle on a Linux hsot
+ - see http://trac.gateworks.com/wiki/jtag_instructions
+ - firmware-venice-imx8mm.bin
+                       - JTAG image of first 16MiB of Flash containing:
+                         partition table SPL, U-Boot, ATF, DDR firmware,
+                         device-trees and default U-Boot env.
+                         Flash with JTAG if recovering a board from an
+                         unknown state.
+ - venice-imx8mm-u-boot_spl.bin
+ - venice-imx8mn-u-boot_spl.bin
+                       - JTAG image of SPL, U-Boot, ATF, DDR firmware and DTBs
+                         (does not modify partition table or U-Boot env)
+ - gsc_7000_v57.txt    - Latest GSC firmware release for GW7000 SoM used on all
+                         GW7xxx product.
+
+Disk Images (Update via Bootloader gzwrite - contains boot firmware + OS):
+ - see http://trac.gaeworks.com/wiki/venice/firmware
+ - focal-venice-imx8mm.img.gz - for IMX8M Mini
+ - focal-venice-imx8mn.img.gz - for IMX8M Nano
 
 [=#firmware-version]