[[PageOutline]] = Venice MIPI DSI / CSI The Venice family of rugged and industrial Single Board Computers feature MIPI Display Serial Interface (DSI) and Camera Serial Interface (CSI) signals on many of the boards. This allows for displays and cameras or video input to the SBC. == 50-pin MIPI Media Connector A 50-pin MIPI Media Connector is available on the GW720x/GW730x/GW740x with the following signalling: - 4-lane (4D+C) CSI (supports a maximum bitrate of 1.5Gbps on IMX8MM) - Allows for camera / video input to the SBC - 4-lane (4D+C) DSI (supports a maximum bitrate of 1.5Gbps on IMX8MM; up to 1080p60 display) - Allows for a LCD Display to be connected to the SBC - Bi-directional I2S audio - I2C - 4x GPIO === GW16136 !RaspberryPi Camera and Display Adapter [[Image(gw16136.png,300px)]] [[Image(gw16136-bottom.png,300px)]] This adapter plugs into the 50-pin MIPI Media header on the Gateworks SBC. The adapter brings all the DSI signals to one connector and CSI to another. The adapter was built in mind to be used with Raspberry Pi displays and cameras. Additional Linux kernel driver support is required for various MIPI, I2C and I2S devices. Purchase the GW16136 on the Gateworks shop: [https://shop.gateworks.com/index.php?route=product/product&path=70_86&product_id=236] ==== Raspberry Pi Displays Not every Raspberry Pi Display will work out of the box. Below are screens Gateworks has evaluated: * [https://www.digikey.com/en/products/detail/dfrobot/DFR0550/9608214 5-inch DFR0550 LCD Touchscreen Display] * [https://www.digikey.com/en/products/detail/dfrobot/DFR0678/13688357 7-inch DFR0678 LCD Touchscreen Display] [[Image(DFR0678-1.jpg,300px)]] === GW16145 MIPI Media Breakout board This adapter plugs into the 50-pin MIPI Media header on the Gateworks SBC. The adapter brings all the signals to a 50 pin header that allows for a cable to be connected. Additional Linux kernel driver support is required for various MIPI, I2C and I2S devices. Connector used on the GW16145: Hirose DF20F-50DP-1V(56) To make a cable that plugs into the GW16145, use Hirose DF20A-50DS-1C (Note also requires crimps) * https://www.digikey.com/en/products/detail/hirose-electric-co-ltd/DF20A-50DS-1C/679773 [[Image(gw16145top.jpg,300px)]] [[Image(gw16145bottom.jpg,300px)]] === Alternate Displays Densitron [https://www.densitron.com/products/tft-displays/mipi-tft MIPI Displays] makes several MIPI based displays with touchscreen options. Densistron can also customize the display's adapter board for volume projects to connect directly with the Venice MIPI DSI/CSI connector.