Changes between Version 9 and Version 10 of ventana/openwrt

Timestamp:

01/24/2019 10:45:39 PM (5 years ago)

Author:

Tim Harvey

Comment:

update URL for jtag programming utility

ventana/openwrt

@@ -32 +32 @@
 This method does not require anything other than a Gateworks USB JTAG programmer, a Linux PC, and the {{{jtag_usbv4}}} application.
 
-'''NOTE: Ventana JTAG only works on Linux and with {{{jtag_usbv4}}}''' found [http://dev.gateworks.com/jtag/linux/x86/jtag_usbv4 here]. Please see [wiki:jtag_instructions JTAG instructions] for more details.
+'''NOTE: Ventana JTAG only works on Linux and with {{{jtag_usbv4}}}''' found [http://dev.gateworks.com/jtag/jtag_usbv4 here]. Please see [wiki:jtag_instructions JTAG instructions] for more details.
 
 The {{{jtag_usbv4}}} application requires a binary firmware image of the entire FLASH storage device. By convention we put a {{{.bin}}} file extension on this. These images are created with the {{{mkimage_jtag}}} script which can be found [http://dev.gateworks.com/ventana/images/mkimage_jtag here]. For details on creating JTAGable FLASH images see [wiki:jtag_instructions#images here].
@@ -69 +69 @@
 See also:
  * [wiki:jtag_instructions JTAG Tutorial Page]
- * [http://dev.gateworks.com/jtag/linux/x86/jtag_usbv4 jtag_usbv4 executable (32/64bit x86 Linux)]
+ * [http://dev.gateworks.com/jtag/jtag_usbv4 jtag_usbv4 executable (32/64bit x86 Linux)]
  * [http://dev.gateworks.com/openwrt/latest/imx6 Ventana most recent pre-built OpenWrt images] 
  * [http://dev.gateworks.com/images/ventana Ventana stable/released pre-built OpenWrt images]