= Windows Embedded Compact 7 ( WEC7 ) = 

This page is to document the use of Windows Embedded Compact 7 on Gateworks Ventana Single Board Computers.

= Licensing = 
 * Gateworks has worked with [http://www.adeneo-embedded.com/ Adeneo Embedded] to provide the WEC7 port. 
 * Gateworks is able to provide a working binary to Gateworks customers
 * All source code should be acquired through Adeneo. (fee)

= Support = 

 * Currently supported on the Ventana GW5400. Contact support for support on other Ventana boards. 
 * Bootable on MicroSd

Features supported:
 * HDMI Output (without audio)
 * LVDS
 * USB EHCI
 * USB OTG port in Host mode
 * USB peripheral support:
  * Bluetooth HCI - Mouse / Keyboard
  * Mouse / Keyboard
  * USB Mass Storage
 * MicroSD
 * eth0 (not eth1)
 * RS232 Serial Console

For additional features, please contact Adeneo for quotes.


= Installing = 

Please contact support@gateworks.com for WEC7 binaries.

There are 2 files that are needed:
 1. A nb0 file (a different file for HDMI vs LVDS displays)
 2. shared.dat

Instructions:
 1. Format MicroSD card with FAT
 2. Place 2 files on the card, nb0 shared.dat
 3. Place card into Ventana board
 4. Power Ventana board
 5. Break into bootloader 
 6. At bootloader command prompt type:
{{{
fatload mmc 0 10000000 shared.dat &&
fatload mmc 0 10200000 NK_Ventana.nb0 &&
dcache off &&
icache off &&
go 10200000
}}}
 7. Possible to boot by default. Modify mmc_boot variable with these lines:
{{{
setenv mmc_boot 'fatload mmc 0 10000000 shared.dat &&; fatload mmc 0 10200000 NK.nb0 &&; dcache off &&; icache off &&; go 10200000'
}}}
 8. saveenv to save changes if desired
 9. Restart board

Please contact support@gateworks.com with any questions.