Changes between Version 74 and Version 75 of wireless/modem


Ignore:
Timestamp:
08/23/2021 04:54:12 PM (10 months ago)
Author:
Ryan Erbstoesser
Comment:

add supported boards for fn980

Legend:

Unmodified
Added
Removed
Modified
  • wireless/modem

    v74 v75  
    17871787 * Approvals: FCC, PTCRB, RED, GCF & More (consult datasheet)
    17881788 * Supports USB 2.0, 3.0 and PCIe Gen3
    1789   * USB 3.0 is not supported on most Venice SBCs
     1789  * USB 3.0 is not supported on most Venice SBCs.
    17901790  * USB 3.0 requires software configuration for some Newport SBCs [wiki:newport/bootloader#hwconfig]
    17911791  * PCIe on the Qualcomm X55 chipset require a new MHI driver which is expected to be only ready in 5.13 kernels or newer
    17921792   * PCIe ID: 17cb:0306
    17931793   * Requires USB 2.0 to switch modem to PCIe mode with the following AT command:  AT#USBPCISWITCH=1,<GPIO>,2 where GPIO is the GPIO assigned active low (tied to ground) pin used to select PCI Express enable.
    1794  * Throughput 5G up to 5.5 DL/1.5 UL Gbps
     1794 * Theoretical throughput 5G up to 5.5 DL/1.5 UL Gbps
    17951795 * Temperature -40 °C to +85 °C
    17961796 * GNSS
     
    18001800 * Drivers:
    18011801  * qmi_wwan, option1
    1802  * Best used with modern kernel, 5.4 or newer and something like Ubuntu
     1802 * Board support
     1803  * Best used with modern kernel, 5.4 or newer and something like Ubuntu
     1804  * Venice SBCs (GW71xx, GW72xx, GW73xx) - Tested and validated working with USB 2.0 and GW16140 M.2 Adapter
     1805  * Newport SBCs (GW61xx, GW62xx, GW63xx, GW64xx) - Tested and validated with USB 2.0 (GW16140) and USB 3.0 (GW16141 Adapter)
    18031806 
    18041807