[[PageOutline]] = Connector and Cable Information = Gateworks provides alternate connectors for specific items on the SBC. These alternate connectors are typically used for rugged applications where a more flat profile or locking connector is needed. == Power Connectors == Gateworks typically loads a 2.5mm barrel jack connector for power however most boards include alternate holes for 0.156"/3.96mm spaced power connectors on larger boards and 2mm pitched connectors on smaller boards. Here is a list of common connectors that Gateworks stocks. Contact support for more information on having your board loaded with one of these alternate connectors. === 0.156"/3.96mm Pitch * Molex Vertical (locking, non-shrouded)-GW!#02050506: (most common) * Pitch - 0.156" (3.96mm) * Common on larger boards, such as Ventana GW53xx, 54xx, 63xx, 64xx * [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=26-60-4020 Digi-Key] * [[Image(26-60-4020.jpg,100px)]] * AMP/Tyco Horizontal (locking, non-shrouded)-GW!#02050194: * Pitch - 0.156" (3.96mm) * [http://www.digikey.com/product-search/en?pv88=2&k=640389-2&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25 Digi-Key] * [[Image(640389-2.jpg,100px)]] * JST Vertical (locking, shrouded)-GW!#02050561: * Pitch - 0.156" (3.96mm) * [http://www.digikey.com/product-search/en?vendor=0&keywords=B2P-VH-FB-B%28LF%29%28SN%29 Digi-Key] * [[Image(B2P-VH-FB-B.jpg)]] * JST Horizontal (locking, non-shrouded)-GW!#02050680: * Pitch - 0.156" (3.96mm) * [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B2PS-VH(LF)(SN) Digi-Key] * [[Image(B2PS-VH.jpg)]] === 0.079" (2.00mm) Pitch * Common on smaller boards like the GW5100, GW5530, GW6100 * GW Part Number: 02050557 * JST B02B-PASK-1(LF)(SN) * Digi-Key: [https://www.digikey.com/products/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B02B-PASK-1(LF)(SN) here] * [[Image(B02B-PASK-1(LF)(SN).jpg)]] * Mating connector: [https://www.digikey.com/product-detail/en/jst-sales-america-inc/PAP-02V-S/455-1486-ND/759974 JST PAP-02V-S] === Locking Barrel Jack * Screw Locking Panel Mount Barrel Jack ~ This connector provides a nice alternative for applications that want to utilize a low cost barrel jack type connector but need it to lock securely. * CUI - PJ-065B [https://www.digikey.com/products/en?keywords=CUI%20-%20PJ-065B] * [[Image(PJ-065B.jpg,200px)]] * Gateworks offers a cable with this connector for boards such as the GW5100. The cable features a 2-pin JST (2mm pitch) on one side which terminates to the screw locking barrel jack. See the following link and picture: ([https://shop.gateworks.com/index.php?route=product/product&product_id=219&search=gw10132 GW10132]). This can be used on boards with 2-pin JST power connectors such as the GW5100. * [[Image(GW10132.png,200px)]] * GW5910 Power Connector - A right angle version of this connector is used on the GW5910 and is installed by default. Here is link to the connector: * Switchcraft L712RA [https://www.digikey.com/product-detail/en/switchcraft-inc/L712RA/SC1472-ND/1289483]. The following mating connectors are available: * Mating plug: [https://www.digikey.com/product-detail/en/tensility-international-corp/50-00011/839-1419-ND/8020954] * Mating cable (right angle): [https://www.digikey.com/product-detail/en/tensility-international-corp/10-00124/839-1015-ND/2123079] * Mating cable (straight): [https://www.digikey.com/products/en?keywords=Tensility%2010-00120] * Entire AC/DC Supply with connector, typically available in high volume through [www.cui.com]. See the following adapter parts/links: * SDI24-24-UDC-P11 https://www.cui.com/product/resource/sdi24-ud.pdf This uses an IEC320/C8 inlet (2 pin AC input) * SDI24-24-UC-P11 https://www.cui.com/product/resource/sdi24-u.pdf. This uses a standard IEC320/C14 inlet (3-pin AC input w/gnd). Note the -P11 suffix at the end of the part numbers specifies the screw locking plug. == Ethernet Connectors == Ethernet requires 8 pins for gigabit and 4 pins for 10/100. We typically use a 2x4 connector with 2mm spacing and through-hole. * JST 8 pin right angle- Shrouded GW PN 02050686 * S08B-PUDSS-1(LF)(SN) * Digi-Key Part Number: 455-2485-ND [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=S08B-PUDSS-1(LF)(SN) Link Here] * JST 8 pin vertical - Shrouded GW PN 02050649 * B08B-PUDSS-1(LF)(SN) * Digi-Key Part Number: 455-2499-ND [http://www.digikey.com/product-search/en?vendor=0&keywords=B08B-PUDSS-1%28LF%29%28SN%29 Link Here] * Samtec 8 pin right angle header - Shrouded GW#02050737 * T2M-104-01-L-D-RA-WT ==== !Venice/Ventana/Newport Alternate Ethernet Diagram ==== [[Image(ventana-alternate-ethernet.jpg,200px)]] === GW5100 & GW6100 Alternate Ethernet Connector === The RJ45 Ethernet connector on the GW5100 & GW6100 can be replaced with an 8-pin pico-Molex connector (Gateworks Part No: 02050633). * Part Number Molex 0532610871 * Digi-Key Part Number: WM7626TR-ND [http://www.digikey.com/product-detail/en/molex-llc/0532610871/WM7626TR-ND/699100 Link Here] == HDMI Connector == There are no options for headers for the HDMI port on the Ventana. == USB Connectors == USB is typically 8 pins and SMT. * USB Host - 8 pin Vertical Shrouded 2x4x2MM * Molex 87832-0810 * GW 02050611 * [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=87832-0810 Digi-Key] * USB OTG (Ventana) - Vertical Latching - 1X4X1.25MM * Hirose DF13-4P-1.25DSA * GW 02050699 * 1X4X1.25MM * Ventana Note: * Boards require resistor load for host or peripheral mode * On boards that do not have an OTG_ID pin to dictate host vs periperhal mode you can assign the role via dt or runtime. See wiki:linux/OTG#dual-role == Pushbutton - Switch Connector == The standard pushbutton on most boards can be replaced with a header typically: * Pushbutton - 2 pin Right Angle Shrouded 1X2X2M * JST S02B-PASK-2(LF)(SN) * GW 02050630 * [https://www.digikey.com/products/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=S02B-PASK-2(LF)(SN) Digi-Key 455-1847-ND] == Front Panel LED ( Red / Green) == The standard LED on most boards can be replaced with a header typically that is .1 inch or 2.54mm and a 1x2. == JTAG / 2x5 10 Pin Connectors == This is a 10 pin small header. (2X5X0.05IN,1.75A,HEADER) Cables are available for purchase here: [http://shop.gateworks.com/index.php?route=product/product&path=70_80&product_id=24] Cables made use: Samtec FFSD-05-D-03.00-01-N The connector on the board itself: Samtec FTSH-105-01-L-DV-K-A == Peripheral Adapters == * See the following for Ventana breakout adapters: [wiki:ventana/breakoutadapters#VentanaCableConnectorInformation Ventana Peripheral Adapters] = Cable Connector Information = The Ventana, Newport, and Venice boards use a variety of JST 2mm spacing connectors for the different I/O ports (RS232, CAN, DIO, video, analog, tamper, etc.). Mates to these connectors can be purchased at Digikey. Here is the info for the various connectors: == JST 1x2 (2mm spacing) == Gateworks Online Shop 2 pin to bare leads: * http://shop.gateworks.com/index.php?route=product/product&product_id=185&search=jst Gateworks Online Shop 2 pin to 2 pin: * http://shop.gateworks.com/index.php?route=product/product&product_id=61&search=jst Onboard Connector * http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B02B-PASK-1(LF)(SN) Mate Connector Housing * http://www.digikey.com/product-detail/en/PAP-02V-S/455-1486-ND/759974 Mate Crimps (note – see associated products under the connector housing for other crimp options) * http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809 == JST 1x3 (2mm spacing) == Gateworks Online Shop 3 pin to bare leads: * http://shop.gateworks.com/index.php?route=product/product&product_id=186&search=jst Onboard Connector * http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B03B-PASK-1(LF)(SN) Mate Connector Housing * http://www.digikey.com/product-detail/en/PAP-03V-S/455-1487-ND/759975 Mate Crimps (note – see associated products under the connector housing for other crimp options) * http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809 == JST 1x4 (2mm spacing) == Please see DigiKey and User Manual. Gateworks Online Shop 4 pin to RJ45 (could be cut) * http://shop.gateworks.com/index.php?route=product/product&product_id=19&search=jst == JST 1x5 (2mm spacing) == Gateworks Online Shop 5 pin to bare leads * http://shop.gateworks.com/index.php?route=product/product&product_id=187&search=jst Gateworks Online Shop 5 pin to 5pin * http://shop.gateworks.com/index.php?route=product/product&product_id=142&search=jst Onboard Connector * http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B05B-PASK-1(LF)(SN) Mate Connector Housing * http://www.digikey.com/product-detail/en/PAP-05V-S/455-1489-ND/759977 Mate Crimps (note – see associated products under the connector housing for other crimp options) * http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809 == JST 1x6 (2mm spacing) == Often used for SPI, a 6-pin header in a 1x6 configuration with 2mm spacing. Gateworks accessory cable: [https://shop.gateworks.com/index.php?route=product/product&product_id=215&search=jst Gateworks Shop] Onboard Connector * JST B06B-PASK-1(LF)(SN) Mate Connector Housing * The mating connector is a JST PAP-06V-S, available from Digi-Key as part number 455-1490-ND. Mate Crimps (note – see associated products under the connector housing for other crimp options) * The mating connector pins are JST SPHD-002T-P05, available from Digi-Key as part number 455-1313-1-ND. == JST 1x10 (2mm spacing) == Often used for DIO, a 10-pin header in a 1x10 configuration with 2mm spacing. Onboard Connector * JST B10B-PASK-1(LF)(SN) Mate Connector Housing * The mating connector is a JST PAP-10V-S, available from Digi-Key as part number 455-1494-ND. [https://www.digikey.com/en/products/detail/jst-sales-america-inc/PAP-10V-S/759982] Mate Crimps (note – see associated products under the connector housing for other crimp options) * The mating connector pins are JST SPHD-002T-P05, available from Digi-Key as part number 455-1313-1-ND. = GW6100 / GW5913 / GW7100 20-pin Connector = A 20-pin expansion header for access to the I/O signals. This is a 2x10 Connector with 1.25MM pitch. The connector on the board is JST S20B-J11DK. The mating connector would be a JST GHDR-20V-S(F). Gateworks sells a development cable GW10127 here: https://shop.gateworks.com/index.php?route=product/product&product_id=214&search=GW10127 = GW5510 30-pin Connector = The GW5510/GW5514 uses a 30-pin expansion header for access to the I/O signals. A Samtec TFM-115-22-L-D-A-TR connector is used on the board for this header. Samtec has both board to board and board to cable options for this connector. For board to board the mating board should use a Samtec SFM-115-02-L-D-A-TR or SFSD-15-28-G-03.25-S. See the GW16111 Expansion board as an example break out board for the GW5510: http://www.gateworks.com/product/item/ventana-gw16111-expansion-adapter For board to cable options the Samtec SFSD series can be used. Pins are rated up to 2.9A per pin. There is no single direct part number because the wiring gauge will differ for each customer, etc. There are many options. Document from Samtec: * [http://suddendocs.samtec.com/catalog_english/sfsd.pdf] Samples may be available on the following link here: [https://www.samtec.com/technical-specifications/default.aspx?seriesMaster=SFSD] Example Digikey link: [http://www.digikey.com/product-search/en?k=sfsd-15&mnonly=0&newproducts=0&ColumnSort=-1000011&page=1&stock=0&pbfree=0&rohs=0&quantity=&ptm=0&fid=0&pageSize=25] = GW5100 and GW5520 Peripheral Connectors / 2x5 10 Pin Connectors = This is a 10 pin small header. (2X5X0.05IN,1.75A,HEADER) Cables are available for purchase here: [http://shop.gateworks.com/index.php?route=product/product&path=70_80&product_id=24] Cables made use: Samtec FFSD-05-D-03.00-01-N The connector on the board itself: Samtec FTSH-105-01-L-DV-K-A = GW16112 USB Expansion Board Connector Information = Gateworks sells an accessory cable pre-made here: [http://shop.gateworks.com/index.php?route=product/product&product_id=193 GW10102 USB Cable] The connector on our board is: CONT,90DEG,MICRO-LOCK,1X4X1.25MM,SHRD Molex 504195-0470 [http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=504195-0470] The mating connector on digi-key is being shown as: Molex 504193-0400 [http://www.digikey.com/product-detail/en/5041930400/WM10575-ND/4879321] = GW16113 Expansion Card Cable Information = The GW16113 is a Mini-PCIe I/O Card. Gateworks has produced a pre-made cable, GW10103. There are 3 connectors on the card for signalling, all connectors are the same. Connector Shell * Molex 504193-1000 Connector Terminals * Molex 504185-1000 [[Image(gw10103mechanical.png,300px)]] [[Image(gw10103actual.jpg,300px)]] = SMA and RPSMA Antenna and Cables = Gateworks offers a number of cables along with !WiFi, Cellular and GPS antenna for use with our products. The following chart provides a quick reference for the various SMA/RPSMA !Male/Female connector configurations. The table also provides Gateworks part numbers for products that use these connectors in our online shop [http://shop.gateworks.com located here] [[Image(SMA_RPSMA.PNG,600px)]] = Mini-PCIe Connector Specification = See the following link for information on the Mini-PCIe connector used on Gateworks SBCs. [http://trac.gateworks.com/wiki/PCI#Mini-PCIeMechanicalSpecification Link]