[[PageOutline]]

= Venice Board Support Package (BSP)
Gateworks provides a Board Support Package for Venice which provides source code and an easy mechanism to build different images, including a minimal Buildroot based distro as well as an Ubuntu based distro.

The Gateworks BSP is the easiest comprehensive software process because it contains everything. If a deep dive, expert path is desired, each piece of the BSP (boot firmware, rootfs, kernel) can all be built separately. 

 * [#kernel Gateworks Venice Linux Kernel]
 * [wiki:venice/boot Gateworks Venice Boot Firmware]

[=#images]
== BSP Pre-Built Firmware Images

Pre-built firmware images can be found on http://dev.gateworks.com/venice.

A sampling includes:

 * ''' Entire Board Software (recommended), including boot firmware, bootloader, OS, kernel, etc: '''
  * [http://dev.gateworks.com/venice/images/ Venice Images] - Compressed Disk Image containing Firmware and kernel and OS ( .img.gz files )
   * Ubuntu version details are available [wiki:venice/ubuntu here]
 * ''' Venice GSC '''
  * [http://dev.gateworks.com/venice/images/ GSC firmware images]
 * '''Only Boot Firmware '''
  - [http://dev.gateworks.com/venice/boot_firmware/venice-imx8mm-flash.bin venice-imx8mm-flash.bin] - Boot Firmware for updating from U-Boot or Linux (everything up to and including the bootloader except for partition table and U-Boot env) (see [wiki:venice/boot venice/boot] for details)
  - [http://dev.gateworks.com/venice/images/venice-imx8mm_u-boot_spl.bin venice-imx8mm_u-boot_spl.bin] - Boot Firmware for updating via JTAG (everything up to and including the bootloader except for partition table and U-Boot env) (see [wiki:venice/boot venice/boot] for details)
  - [http://dev.gateworks.com/venice/images/firmware-venice-imx8mm.bin firmware-venice-.bin] - Boot Firmware for updating via JTAG (everything up to and including the bootloader including partition table and U-Boot env) (see [wiki:venice/boot venice/boot] for details)
 * '''Only Venice Kernel '''
  * [http://dev.gateworks.com/venice/kernel/linux-venice.tar.xz linux-venice.tar.xz] - Compressed TAR archive of pre-built Linux kernel

Installation instructions:
 - [wiki:/venice/firmware Venice Flashing Instructions for updating from U-Boot or Linux]
 - [wiki:jtag_instructions JTAG instructions for updating Boot Firmware]


[=#source]
== BSP Source Code
Source code for the firmware, bootloader and kernel are hosted at !GitHub. We highly recommend you create a !GitHub account and 'Watch' these repositories to keep abreast of important feature additions, bugfixes, and firmware-releases. You can configure your !GitHub account to e-mail you when changes are made to repositories [https://github.com/settings/notifications here].

The following !GitHub repos are used for Venice:
 * [https://github.com/Gateworks/bsp-venice] - Venice BSP support scripts and Makefile  ([https://github.com/Gateworks/bsp-venice/subscription watch])
 * [https://github.com/Gateworks/manifest-venice] - Venice BSP repo Manifest  ([https://github.com/Gateworks/manifest-venice/subscription watch])
 * [https://github.com/Gateworks/atf-venice atf-venice] - ARM Trusted Firmware ([https://github.com/Gateworks/atf-venice/subscription watch)]
 * [https://github.com/Gateworks/uboot-venice uboot-venice] - Venice Bootloader ([https://github.com/Gateworks/uboot-venice/subscription watch)]
 * [https://github.com/Gateworks/linux-venice linux-venice] - Venice Linux Kernel ([https://github.com/Gateworks/linux-venice/subscription watch)]


[=#build]
== Building the BSP from source
Below are instructions for building the entire BSP, which includes all of the bootloader components, Linux kernel, and Ubuntu.  Pre-built images are available [#images above].

The Gateworks Venice Board Support Package uses the Google [https://gerrit.googlesource.com/git-repo/git-repo git-repo] tool to manage multiple code repositories.

The following pre-requisites are needed to build the Venice BSP:
 * Linux Development host (desktop or laptop computer) (Ubuntu 16.04 is used by Gateworks and tested)
 * Python 2.x (required by the 'repo' tool)
 * Git (used for source code repositories)
 * repo (used to manage multiple git repos)
** NOTE: Building images requires root privileges

Installing pre-requisites:
{{{#!bash
sudo apt-get install build-essential git python libssl-dev ncurses-dev kmod bison flex device-tree-compiler -y
}}}

Install the latest version of {{{repo}}} (Do not rely on Ubuntu apt package being up to date):
{{{#!bash
sudo wget https://storage.googleapis.com/git-repo-downloads/repo -O /usr/local/bin/repo
sudo chmod a+rx /usr/local/bin/repo
}}}

To obtain the code:
 1. Initialize repo (fetch the repo manifest)
{{{#!bash
mkdir $HOME/venice
cd $HOME/venice
repo init -u https://github.com/Gateworks/manifest-venice.git
}}}
 1. Sync repositories (repeat this when you want to fetch the latest code updates)
{{{#!bash
repo sync
}}}
  * This will fetch/update the source repos described [#source above]. The first time it can take several minutes depending on your Internet connection and will take approximately ~3GB of disk space
 1. Setup build environment (***repeat this each time you open a shell***)
{{{#!bash
source setup-environment
}}}
 1. Build desired software target as defined below. For example:
{{{#!bash
make -j8 ubuntu-image # build focal-venice.img.gz
}}}



[=#repo]
=== Working with the repo tool
The {{{repo}}} tool unifies Git repositories into a single project by specifying Git repos and directories they exist in. The tool was created for the Android project as Android is comprised of hundreds of repos however it has since been used by many projects that benefit from its git repo management tool.

See:
 - https://source.android.com/setup/develop#repo
 - https://gerrit.googlesource.com/git-repo/+/refs/heads/master/README.md
 - https://source.android.com/setup/develop/repo

==== Updating to the latest code (repo sync)
When working with the {{{repo}}} tool you can update to the latest code using the {{{repo sync}}} command:
{{{#!bash
$ repo sync
Fetching: 100% (8/8), done in 5.258s
Garbage collecting: 100% (8/8), done in 0.188s
repo sync has finished successfully.
}}}

The {{{repo}}} tool works off of a manifest file in {{{.repo/manifests/default.xml}}} which specifies the various projects, what repo they are in, and where they are checked out in your directory structure. If a branch has changed, a project added, or a project removed the manifest file will be updated when you run {{{repo sync}}} then it will update the various project repos. If a branch has changed to something new you can encounter an error such as:
{{{#!bash
$ repo sync
remote: Enumerating objects: 5, done.
remote: Counting objects: 100% (5/5), done.
remote: Compressing objects: 100% (1/1), done.
remote: Total 3 (delta 1), reused 3 (delta 1), pack-reused 0
Unpacking objects: 100% (3/3), done.
project .repo/manifests/
Updating 5c981dac1797..0b0055e7445e
Fast-forward

error: in `sync`: revision v5.10.76-venice in Gateworks/linux-venice not found
}}}

This specific error is saying that the 'v5.10.76-venice' revision (or branch) is not in the current working copy of the repo. To resolve this you need to do a {{{git remote update}}} for that project. You can also use {{{repo foreach}}} to update all projects:
{{{#!bash
repo forall -c git remote update # update all projects
git -C linux remote update # update just the project in the linux path
}}} 


==== Showing diffs for all projects (repo diff)
You can show all the diffs for each project using {{{repo diff}}} 

==== Using the latest version
The {{{repo}}} tool is updated frequently. While it is rarely necessary to have the latest version it will inform you if there is an update and how to install that update in the current working directory:
{{{#!bash
$ repo sync

... A new version of repo (2.17) is available.
... You should upgrade soon:
    cp /usr/src/venice/bsp/.repo/repo/repo /home/user/bin/repo
...
}}}

To update the {{{repo}}} tool just copy the file as mentioned above:
{{{#!bash
cp .repo/repo/repo $HOME/bin/repo
}}}


[=#kernel]
=== Modifying the stand-alone Linux Kernel
The Gateworks Venice BSP instructions [#build above] create an environment for building the Linux kernel among other targets.

Some additional instructions for common actions (make sure you have already installed the BSP and setup your shell environment as specified above):
 * Make standard Gateworks Venice kernel with Gateworks venice_defconfig
{{{#!bash
make linux # first build the kernel with the standard venice_defconfig
}}}
 * Modify Kernel configuration (enabling modules etc):
{{{#!bash
make -C linux menuconfig # make your changes
make -C linux savedefconfig # create a minimal 'defconfig' file in the linux kernel dir
diff linux/defconfig linux/arch/arm64/configs/imx8mm_venice_defconfig # show diffs (optional)
cp linux/defconfig linux/arch/arm64/configs/imx8mm_venice_defconfig # copy the modified defconfig over the one used for venice
}}}
 * Build kernel tarball:
{{{#!bash
make uboot # builds uboot, a requirement to build the kernel and modules and tarball
make kernel_image # builds the kernel and modules and tarball
}}}
 * Build new disk image using the updated kernel tarball:
{{{#!bash
make ubuntu-image
}}}


[=#toolchain]
== Toolchain

=== Buildroot based toolchain
The Venice BSP uses buildroot to build the toolchain used to build the kernel and bootloader firmware.

The buidlroot config is [https://github.com/Gateworks/bsp-venice/blob/master/buildroot-imx8mm_venice_defconfig venice/buildroot-imx8mm_venice_defconfig] which is copied to buildroot/configs/imx8mm_venice_defconfig.

The bsp [https://github.com/Gateworks/bsp-venice/blob/master/Makefile Makefile] has a 'toolchain' target which is built as a pre-requisite for building the bootloader and kernel.

The buildroot version is 2020.05.3 and builds a toolchain with the following details (which are all defaults for buildroot):
 - Linux 5.6.x kernel headers
 - uClibc libc
 - binutils 2.32
 - gcc 8.x
 - C++ support (default is to disable this; we enable it)

The specific details can be shown by running 'gcc -v' for example:
{{{#!bash
user@host:/usr/src/venice/bsp$ . ./setup-environment # configure PATH and CROSS_COMPILER env vars
user@host:/usr/src/venice/bsp$ ${CROSS_COMPILE}gcc -v
Using built-in specs.
COLLECT_GCC=/usr/src/venice/bsp/buildroot/output/host/bin/aarch64-linux-gcc.br_real
COLLECT_LTO_WRAPPER=/usr/src/venice/bsp/buildroot/output/host/libexec/gcc/aarch64-buildroot-linux-uclibc/8.4.0/lto-wrapper
Target: aarch64-buildroot-linux-uclibc
Configured with: ./configure --prefix=/usr/src/venice/bsp/buildroot/output/host --sysconfdir=/usr/src/venice/bsp/buildroot/output/host/etc --enable-static --target=aarch64-buildroot-linux-uclibc --with-sysroot=/usr/src/venice/bsp/buildroot/output/host/aarch64-buildroot-linux-uclibc/sysroot --enable-__cxa_atexit --with-gnu-ld --disable-libssp --disable-multilib --disable-decimal-float --with-gmp=/usr/src/venice/bsp/buildroot/output/host --with-mpc=/usr/src/venice/bsp/buildroot/output/host --with-mpfr=/usr/src/venice/bsp/buildroot/output/host --with-pkgversion='Buildroot 2020.05.3' --with-bugurl=http://bugs.buildroot.net/ --disable-libquadmath --disable-libsanitizer --enable-tls --enable-threads --without-isl --without-cloog --with-abi=lp64 --with-cpu=cortex-a53 --enable-languages=c,c++ --with-build-time-tools=/usr/src/venice/bsp/buildroot/output/host/aarch64-buildroot-linux-uclibc/bin --enable-shared --disable-libgomp
Thread model: posix
gcc version 8.4.0 (Buildroot 2020.05.3)
}}}


Note there are other options you may want to change for your needs such as using a different libc, different compiler version, or enable WCHAR support or additional threading support. To do so you can:
{{{#!bash
cd buildroot
make menuconfig # select options desired under Toolchain
make clean
make 
}}}
 * make sure you clean and rebuild when changing toolchain options

The buildroot based toolchain is used by virtue of sourcing the [https://github.com/Gateworks/bsp-venice/blob/master/setup-environment setup-environment] file which adds to your PATH and sets the CROSS_COMPILE variable.

=== External toolchain
The Venice BSP uses buildroot to build the toolchain used to build the kernel and bootloader firmware.

While the BSP makefile will always build the buildroot toolchain (unless you comment that out in the Makefile) you can easily use a toolchain of your liking by modifying the environment like 'setup-environment' does. Simply make sure to set CROSS_COMPILE to the prefix of your toolchains 'gcc' compiler and other tools, and make sure your external toolchain shows up first in your PATH.


=== Cross compile examples

Examples of cross-compiling using the buildroot toolchain
 * ANSI-C hello world:
{{{#!bash
cat << EOF > helloworld.c
#include <stdio.h>
#include <stdlib.h>

int main(int argc, char **argv)
{
        printf("hello world!\n");

        return 0;
}
EOF
. ./setup-environment # setup environment for buildroot toolchain
${CROSS_COMPILE}gcc helloworld.c --static -o helloworld
}}}
  - Note that if you want to use shared libraries you would either need to copy the toolchains libc (buildroot/output/target/lib/) to the target so that the interpreter and shared libs are present or you can use Ubuntu's cross-toolchain instead (see [wiki:/ubuntu#hello-world.c ubuntu/cross-compile]) 
 * C++ hello world:
{{{#!bash
cat << EOF > helloworld.cpp
#include <iostream>

using namespace std;

int main() {
        cout << "Hello World!";
        return 0;
}
EOF
. ./setup-environment # setup environment for buildroot toolchain
${CROSS_COMPILE}gcc helloworld.cpp --static -lstdc++ -o helloworld
}}}
  - Note that if you want to use shared libraries you would either need to copy the toolchains libc (buildroot/output/target/lib/) to the target so that the interpreter and shared libs are present or you can use Ubuntu's cross-toolchain instead (see [wiki:/ubuntu#hello-world.c ubuntu/cross-compile]) 
 * kernel module:
{{{#!bash
. ./setup-environment # setup environment for buildroot toolchain
make kernel_image # first build the kernel
make -C linux M=$PWD/my-module modules
}}}
  - Note that some out-of-tree kernel modules do not follow the suggested Makefile standards and may need to be modified to use the CROSS_COMPILE prefix and/or specify the kernel directory (as opposed to the above example where you do a make in the linux dir and set M to the path of your module)


= SSH using Ubuntu

By default root ssh access is disabled for security. See [wiki:/ubuntu#SSHServer This link] for info on enabling it