= Venice Ethernet
[[PageOutline]]

Venice Ethernet device mapping:
||= Board =||= Connector =||= Silkscreen =||= U-Boot =||= Linux =||= MAC/Phy =||= Notes =||
|| GW740x  || J21 || Eth#0 || eth1 || eth1 || IMX8MP EQOS RGMII GPY111 || 802.3at class5 PoE || 
||         ||  -  ||   -   || eth0 || eth0 || IMX8MP FEC RGMII KSZ9477 Port5 || cpu uplink || 
||         || J22 || Eth#1 || lan1 || lan1 || KSZ9477 Port1 || Passive 8-60V PoE || 
||         || J22 || Eth#2 || lan2 || lan2 || KSZ9477 Port2 || ||
||         || J23 || Eth#3 || lan3 || lan3 || KSZ9477 Port3 || ||
||         || J23 || Eth#4 || lan4 || lan4 || KSZ9477 Port4 || ||
||         || J24 || Eth#5 || lan5 || lan5 || KSZ9477 Port5 || ||
||||
|| GW730x  || J20 || Eth#0 || eth0 || eth0 || IMX8MM FEC RGMII GPY111 ||  802.3at class4 PoE 
||         || J21 || Eth#1 || eth1 || eth1 / enp6s0 || PCI LAN7430 or 88E8057 || Passive 8-60V PoE 
||||
|| GW720x  || J17 ||  || eth0 || eth0 || IMX8MM FEC RGMII GPY111 || 802.3at class4 PoE 
||         || J17 ||  || eth1 || eth1 / enp5s0 || PCI LAN7430 or 88E8057 || Passive 8-60V PoE 
||||
|| GW710x  || J16  || Ethernet || eth0 || eth0 || IMX8MM FEC RGMII GPY111 || Passive 8-60V PoE ||
 * Port ordering above is from leftmost RJ45 on board when viewing the front-panel