[[PageOutline]]

= Gateworks Venice Family Ordering Options =
The following is an explanation of how the part numbers are constructed for Venice board versions that use SOMs. For other options, contact the factory for a customer specific special. Note customer specials require a minimum 100 piece build size.

Development kits include a standard board or a max board depending on which version you order. 

Please view all the products on our ​[http://www.gateworks.com/product Product Selection Guide]


== Part Numbering Scheme for Venice Boards with SOMs ==
Gateworks Venice part numbers use the following scheme:

A standard Venice part number would be something like this:
GW7300-00

The first part of the number, GW7300, refers to the baseboard which contains all the peripherals.

For example, a GW7300 is a standard baseboard and a GW7301 is a baseboard with maximum peripherals (GPS, onboard !WiFi/BLE chip, etc.). 

The last two digits after the hyphen refers to the SOM version and what is loaded for the CPU+DRAM+Flash.

Part numbers ending in:
 * GW7xxx-00 = Standard memory and flash
 * GW7xxx-01 = **Maximum board configuration** increase flash memory to 64GB + increase DDR Memory to Max (4GB, depending)

These are simply guidelines.

Please consult each specific model below for verification.

=== Revisions

The revision of the SOM and baseboard are tracked separately and are the last 2 letter digits in the full part number. 

For example, a GW7300-00-E1F:
 * E.1 is the revision of the base board, the GW7300
  * dot level revisions exist for BOM changes only and not a PCB change
 * F is the revision of the SOM 

SBC Revisions are described here: [wiki:sbcrevisions]

=== Development Kits ===
Gateworks offers two options for all Venice Development Kits, a min kit and a max kit. See below for example: 

GW11049-1 Dev Kit = Includes GW7300-00 = Min Board and Min SOM with 1GB DDR Memory + 8GB Flash

GW11049-2 Dev Kit = Includes GW7301-01 Max Board and Max SOM with 4GB DDR Memory + 64GB Flash + GPS + !WiFi/BLE