Changes between Version 2 and Version 3 of enclosures


Ignore:
Timestamp:
06/12/2018 05:00:54 PM (6 years ago)
Author:
Ryan Erbstoesser
Comment:

add info about gw10091

Legend:

Unmodified
Added
Removed
Modified
  • enclosures

    v2 v3  
    3535The GW3021 enclosure is IP67 rated enclosure for outdoor installations of Gateworks 4x4 and 4x6 Avila, Cambria, Laguna, Newport and Ventana network processing boards. The GW3021 provides complete protection against the ingress of dust (6) and water when immersed to 1m for up to 30 minutes (7). The enclosure includes four antenna connectors and two shielded weatherproof RJ-45 Ethernet connectors. The antenna connectors are located at the four corners to increase spatial diversity and decrease RF grounding to the mounting mast. Power is supplied to the unit through the Ethernet connector using a passive PoE injector or PoE power supply. The enclosure includes a pole mount bracket, processor heat sink and a long life, ball bearing fan to reduce thermal hot spots by circulating the air inside the enclosure. The enclosure comes fully assembled and ready to go with all mounting hardware.
    3636 * Note fan connector was designed for Laguna SBCs. For other board families, please cut wires and install appropriate connector.
     37 * Note: GW10091 Adapter plate required for Ventana/Newport SBCs, shown [#GW10091 below]
    3738
    3839[[Image(gw3021.gif)]][[BR]]
    3940
    4041
    41 
    42 === Gateworks IP67 Outdoor Enclosure with Ventana / Newport Adapter Plate ===
    43 Below is the plate mounted in the Outdoor Enclosure.
     42[=#GW10091]
     43=== Gateworks IP67 Outdoor Enclosure with Ventana / Newport GW10091 Adapter Plate ===
     44Below is the GW10091 adapter plate mounted in the Outdoor Enclosure.
    4445
    4546A few items to note: