Changes between Version 11 and Version 12 of expansion/gw16130


Ignore:
Timestamp:
04/25/2019 03:36:34 PM (5 months ago)
Author:
Ron Eisworth
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • expansion/gw16130

    v11 v12  
    88== Single Board Computer Support ==
    99
    10 The modem has been tested and verified on Gateworks SBCs in a Mini-PCIe slot with USB 2.0 routed. The modem is supported on a wide variety of software, as it works over AT commands using a USB to UART adapter. The FTDI USB to UART driver must be installed on the operating system, however, this is default on Gateworks BSPs.
     10The modem has been tested and verified on Gateworks SBCs in a Mini-PCIe slot with USB 2.0 routed. The modem is supported on a wide variety of software, as it works over AT commands using a USB to UART adapter. The FTDI USB to UART driver must be installed on the operating system, however, this is default on Gateworks BSPs. The GW16130 utilizes the FT231XQ device.
    1111
    1212See below for the Mini-PCIe edge finger pinout on the GW16130. The USB signals are mapped to the standard pins specified in the Mini-PCIe specification (pins 36 & 38).
     
    101101 * Drifting Buoy Project using 9603 http://mdbuoyproject.wixsite.com/default
    102102 * Gateworks GW16130 datasheet http://www.gateworks.com/product/item/gw16130-mini-pcie-satellite-modem
     103 * FTDI Drivers (FT231XQ device is used) https://www.ftdichip.com/FTDrivers.htm
    103104