Changes between Version 33 and Version 34 of gsc


Ignore:
Timestamp:
04/24/2019 08:22:02 PM (5 years ago)
Author:
Bobby Jones
Comment:

Add R0.7 bit description for force hard reset of cpu WDOG/reset complete signal

Legend:

Unmodified
Added
Removed
Modified

  • gsc

    v33 v34  
    860860|| 5     || TAMPER_DETECT       || 0 = Do not activate tamper switch operation[[BR]] 1 = Activate tamper switch operation. When Activated, if the tamper switch[[BR]] is released, the contents in the EEPROM user space will be erased[[BR]] Generates tamper switch interrupt. ||Disabled||Disabled||
    861861|| 6     || SWITCH_HOLD         || 0 = Switch hold disabled.[[BR]] 1 = Switch Hold On. When the switch is held down for >700ms an interrupt[[BR]] will be generated. See interrupt Enable / Status registers. (supported in rev29+) ||Disabled||Disabled||
    862 || 7     ||                     || Reserved ||||||
     862|| 7     || CPU_WDOG_POWERCYCLE || 0 = Disabled. CPU WDOG signals only trigger a software reset. [[BR]] 1 = Enabled. Convert CPU WDOG signal into a full board power cycle. || Enabled || Not supported ||
    863863
    864864[=#gsc_ctrl_1]