Changes between Version 59 and Version 60 of gsc


Ignore:
Timestamp:
07/30/2020 12:03:09 AM (4 years ago)
Author:
Bobby Jones
Comment:

Point to new reg_save_load section in firmware reset behavior

Legend:

Unmodified
Added
Removed
Modified

  • gsc

    v59 v60  
    14101410The following items are reset if the battery is removed for more than 10 seconds or if the GSC firmware has been updated:
    14111411 * RTC value (reset to 0 seconds since midnight Jan 1 1970)
    1412  * GSC configuration registers (R0's reset value varies from board to board, the others default to 0).
     1412 * GSC configuration registers (R0's reset value varies from board to board, the others default to 0). On GSCv3 firmware v57 and later, refer to the [#reg_save_load Register Save/Load] section for related functional changes.
    14131413 * Fan controller registers default to the temperature setpoints shown in the Fan Controller section above
    14141414 * '''Secure Key''' EEPROM area is set to 0xff's (see EEPROM section above)