Changes between Version 29 and Version 30 of sbcrevisions


Ignore:
Timestamp:
03/30/2020 10:43:56 PM (4 years ago)
Author:
Ryan Erbstoesser
Comment:

add 6903 and 6400c

Legend:

Unmodified
Added
Removed
Modified

  • sbcrevisions

    v29 v30  
    139139Date: 08/02/2019
    140140 * Replace GSC crystal and crystal load capacitors to optimize oscillator operation and increase RTC accuracy
     141
     142=== Revision C
     143Date: 02/28/2020
     144 * Replace CAN Bus STBY no connect with ground
     145 * Add 3-axis accelerometer (optional)
     146 * Replace CFG_BC_EN 10K pull-down resistor with 200K to disable USB-IF R1.2 battery charging
     147 * Add 4.75K pullup resistors to OcteonTX digital I/O signals that are available to the user on the GPIO connector
     148 * Add zero ohm configuration resistors to connect LDO output to 3.3V for customers not using shut down and wanting to monitor the battery voltage.
     149 * Route GPS PPS to pin 19 of J10 and J12 through a zero ohm resistor.
     150
     151
     152[=#gw6903]
     153== GW6903
     154
     155=== Revision B.1
     156Date: 03/30/2020
     157 * Initial release
    141158
    142159----