Changes between Version 5 and Version 6 of sbcrevisions


Ignore:
Timestamp:
01/05/2018 08:23:09 AM (3 months ago)
Author:
Ryan Erbstoesser
Comment:

Capitalize letters for proper grammar for newport

Legend:

Unmodified
Added
Removed
Modified
  • sbcrevisions

    v5 v6  
    1313Date: 12/15/2017
    1414 * Initial release
    15  * fix GSC BATT current protection (cut/wire)
     15 * Fix GSC BATT current protection (cut/wire)
    1616
    1717=== Revision B.3 ===
    1818Date: 01/04/2018
    19  * fix voltage strapping for MDIO (cut/wire) (see [wiki:newport/errata#np1 Errata NP1])
    20  * load resistors for PHY_RST# capability (see [wiki:newport/errata#np1 Errata NP1])
     19 * Fix voltage strapping for MDIO (cut/wire) (see [wiki:newport/errata#np1 Errata NP1])
     20 * Load resistors for PHY_RST# capability (see [wiki:newport/errata#np1 Errata NP1])
    2121
    2222=== Revision C ===
    2323Date: 01/04/2018
    24  * replace 0.22uF AC coupling caps on !SerDes lanes with 0.1uF (recommended values for PCIe gen1/gen2)
    25  * move CPU LEDR from GPIO-13 to GPIO-31 to resolve CPU frequency strapping (850MHz -> 800MHz)
    26  * move PHY_RST# from GPIO-31 to GPIO-23 and make open-collector
    27  * fix voltage strapping for MDIO (see [wiki:newport/errata#np1 Errata NP1])
    28  * fix GSC BATT current protection
    29  * replace USB3 VBUS filters for improved manufacture-ability
    30  * add EMI protection on RJ45 LED's
    31  * added series resistor to miniPCI socket PERST# signals (to allow optional unload)
     24 * Replace 0.22uF AC coupling caps on !SerDes lanes with 0.1uF (recommended values for PCIe gen1/gen2)
     25 * Move CPU LEDR from GPIO-13 to GPIO-31 to resolve CPU frequency strapping (850MHz -> 800MHz)
     26 * Move PHY_RST# from GPIO-31 to GPIO-23 and make open-collector
     27 * Fix voltage strapping for MDIO (see [wiki:newport/errata#np1 Errata NP1])
     28 * Fix GSC BATT current protection
     29 * Replace USB3 VBUS filters for improved manufacture-ability
     30 * Add EMI protection on RJ45 LED's
     31 * Added series resistor to miniPCI socket PERST# signals (to allow optional unload)
    3232
    3333----