Changes between Version 34 and Version 35 of FSA
- Timestamp:
- 07/29/2026 02:47:37 PM (106 minutes ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
FSA
v34 v35 2207 2207 || 45 || NC || NC || 46 || 2208 2208 || 47 || NC || NC (can be 1.5V)^^^2^^^ || 48 || 2209 || 49 || NC || GND || 50 ||2209 || 49 || NC (Opt GPS_PPS) ^^^4^^^ || GND || 50 || 2210 2210 || 51 || NC || 3.3V || 52 || 2211 2211 1. A GPIO steerable MUX allows the PCI signals to be muxed to USB2.0 2212 2212 2. While a VDD_1P5 signal is part of the miniPCIe specification most cards do not use it and the voltage regulator is unloaded by default (but can be loaded as a special build) 2213 2213 3. PCI REFCLK can be isolated via resistor build options (many MiniPCIe cards that do not use PCI use these signals for something else) 2214 4. GPS_PPS is optionally routed off pin 49 with the optional load resistor R2 to connect any GPS_PPS from the Mini-PCIe card back to the CPU. 2214 2215 2215 2216 The following FSA GPIO's are used on this adapter:
