Changes between Version 9 and Version 10 of SDR
- Timestamp:
- 03/25/2021 07:31:47 PM (4 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
SDR
v9 v10 18 18 || Super High Frequency (SHF) || 3GHz to 30GHz || Satellite, 5G, Wifi, || 19 19 20 21 22 23 24 25 26 20 == Who is Epiq? 27 21 … … 37 31 * Serial Console and network connections to the Gateworks SBC 38 32 39 The Z2 can be used independently of Gateworks products with its (included) USB adapter. Before connecting your Z2 to a Gateworks board it's best to verify it's functionality and check that your antenna connections are being made correctly. If you will be using [wiki:/SDR#ERA ERA] now is a good time to install it.33 The Z2 can be used independently of Gateworks products with its (included) USB adapter. Before connecting your Z2 to a Gateworks board it's best to verify it's functionality and check that your antenna connections are being made correctly. If you will be using the Epiq RF Analyzer software [wiki:/SDR#ERA ERA] now is a good time to install it. 40 34 41 35 == Hardware configuration … … 43 37 Attach the Z2 to the Gateworks SBC in any slot where USB signaling is provided. 44 38 45 Verify antennas are attached to RX and TX U.FL connectors on the Z2. 39 Verify antennas are attached to RX and TX U.FL connectors on the Z2. Note you will need antennas tuned to the frequency band you're interested in monitoring. 46 40 47 41 == Software configuration