{{{#!html

  1. Accelerometer and Magnetometer
    1. OS Support
    2. Android use via the Android sensor HAL
    3. Linux input device access
    4. direct i2c access

Accelerometer and Magnetometer

Many Ventana models come standard with an Accelerometer and Magnetometer on a single ​FXOS8700CQR1 IC.

Note that this device has a low power standby mode which it is in by default, so be sure to enable it if you want to read values from it (see examples below). Register 0x2a and 0x5b relate to this.

References:

OS Support

The FXOS8700 used on many Ventana boards is supported in the following ways:

OpenWrt Yocto/OE Android
i2c/input (r671) i2c/input i2c/input/sensor HAL

Android use via the Android sensor HAL

The Android BSP will register an accelerometer and a magnetometer sensor with the OS and therefore can be used with apps conforming the the Android sensor API.

References:

Linux input device access

The ​Linux input device API provides access to devices through a /dev/input/event<n> interface. The FXOS8700 is supported via a linux input driver on all of the Gateworks BSP's.

The /sys/class/input/input<n>/name directories will show the device name responsible for the events within that directory which correspond to matching /dev/input/event<n> entries.

Additionally there will be an api for the input device in /sys/devices/virtual/input/input<n>/ that provides you access to various controllable aspects of the input device such as the polling frequency, the min/max values, the scaling mode used and the position (orientation) of the sensor on the board. The scaling mode and position will cause the values reported to the linux input subsystem to be transformed (for normalization).

You can use the popular evtest application to show details and events from a linux input device, or write an application that accesses the device yourself.

Example usage: 

> cat /sys/devices/virtual/input/input2/name # show the name of the sensor
fxos8700_m
> cat /sys/devices/virtual/input/input2/position # show the orientation of the sensor
3
> echo 1 > /sys/devices/virtual/input/input2/enable # enable the sensor (take it out of standby mode)
> evtest /dev/input/event2 # show info and values
> evtest /dev/input/event2
Input driver version is 1.0.1
Input device ID: bus 0x18 vendor 0x0 product 0x0 version 0x0
Input device name: "fxos8700_m"
Supported events:
  Event type 0 (Sync)
  Event type 3 (Absolute)
    Event code 0 (X)
      Value     69
      Min    -8192
      Max     8191
      Fuzz      32
      Flat      32
    Event code 1 (Y)
      Value    -31
      Min    -8192
      Max     8191
      Fuzz      32
      Flat      32
    Event code 2 (Z)
      Value    698
      Min    -8192
      Max     8191
      Fuzz      32
      Flat      32
Testing ... (interrupt to exit)
Event: time 1418930877.756913, type 3 (Absolute), code 0 (X), value 69
Event: time 1418930877.756913, type 3 (Absolute), code 1 (Y), value -62
Event: time 1418930877.756913, type 3 (Absolute), code 2 (Z), value 698
Event: time 1418930877.756913, -------------- Report Sync ------------
Event: time 1418930877.996939, type 3 (Absolute), code 1 (Y), value -59
Event: time 1418930877.996939, type 3 (Absolute), code 2 (Z), value 670
Event: time 1418930877.996939, -------------- Report Sync ------------
Event: time 1418930878.116877, type 3 (Absolute), code 1 (Y), value -58
Event: time 1418930878.116877, -------------- Report Sync ------------
Event: time 1418930878.236933, type 3 (Absolute), code 1 (Y), value -64
Event: time 1418930878.236933, -------------- Report Sync ------------
Event: time 1418930878.356942, type 3 (Absolute), code 1 (Y), value -66
Event: time 1418930878.356942, -------------- Report Sync ------------
Event: time 1418930878.476883, type 3 (Absolute), code 2 (Z), value 659
Event: time 1418930878.476883, -------------- Report Sync ------------
Event: time 1418930878.716929, type 3 (Absolute), code 0 (X), value 91
Event: time 1418930878.716929, -------------- Report Sync ------------
Event: time 1418930879.076878, type 3 (Absolute), code 2 (Z), value 652
Event: time 1418930879.076878, -------------- Report Sync ------------
^C

References:

direct i2c access

The FXOS8700 device is on the third (0 based) i2c bus at a slave address of 0x1e. Therefore you can access it directly without the need of a driver if necessary by knowing the register set from the datasheet.

Example script: 

#!/bin/sh

# set to active mode
i2cset -f -y 2 0x1e 0x2a 1
# enable both accelerometer and magnetometer
i2cset -f -y 2 0x1e 0x5b 3

while [ 1 ]; do
  # accelerometer vector
  a_x=$(( $( i2cget -f -y 2 0x1e 0x01 ) << 8 | $( i2cget -f -y 2 0x1e 0x02 ) ))
  a_y=$(( $( i2cget -f -y 2 0x1e 0x03 ) << 8 | $( i2cget -f -y 2 0x1e 0x04 ) ))
  a_z=$(( $( i2cget -f -y 2 0x1e 0x05 ) << 8 | $( i2cget -f -y 2 0x1e 0x06 ) ))

  # magnetometer vector
  m_x=$(( $( i2cget -f -y 2 0x1e 0x33 ) << 8 | $( i2cget -f -y 2 0x1e 0x34 ) ))
  m_y=$(( $( i2cget -f -y 2 0x1e 0x35 ) << 8 | $( i2cget -f -y 2 0x1e 0x36 ) ))
  m_z=$(( $( i2cget -f -y 2 0x1e 0x37 ) << 8 | $( i2cget -f -y 2 0x1e 0x38 ) ))

  echo "$a_x/$a_y/$a_z $m_x/$m_y/$m_z"
done

Running: 

> ./test
16312/768/1824 65476/65467/690
16240/704/2000 65469/65480/687
16280/688/1912 65498/65467/683
16304/688/1976 65482/65468/697
16288/720/1944 65463/65475/704
16312/656/1944 65477/65461/684
16312/688/2000 65477/65455/680
16240/592/1840 65486/65479/667
16336/672/1944 65483/65467/693
16336/672/1856 65469/65462/668
16352/736/1944 65491/65469/716
16272/672/1944 65489/65472/687^C