Changes between Version 16 and Version 17 of canbus
- Timestamp:
- 06/10/2024 03:57:01 PM (3 months ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
canbus
v16 v17 83 83 * CAN2_TXD pin 23 84 84 85 For connecting a cable to the MIPI connector the GW16145 breakout adapter can be used. For more info on this adapter see this link [https://trac.gateworks.com/wiki/venice/mipi#GW16145MIPIMediaBreakoutboard GW16145 Breakout Board] 86 85 87 Note the Termination resistor options in the table above and remember that a properly terminated CAN network will have 120ohm termination across CAN_L and CAN_H at each end of the bus for a total measured resistance of 60ohm. 86 88