Changes between Version 27 and Version 28 of faq


Ignore:
Timestamp:
01/08/2019 10:15:54 PM (6 years ago)
Author:
Cale Collins
Comment:

bold gsc boot page

Legend:

Unmodified
Added
Removed
Modified

  • faq

    v27 v28  
    228228Thus, the question arises, what would one expect when using the shutdown command on a Gateworks embedded board? The command itself cannot actually unplug the physical power cord.
    229229
    230 The reboot command, in it's natural form would only reset the CPU briefly, but often so fast that the entire set of system peripherals don't properly get reset. Thus, Gateworks has steered the reboot command to use a GSC sleep for 2 seconds to act like a reset/reboot, while actually fully power cycling the main supply. This is only implemented in Gateworks BSPs that contain the proper GSC drivers and will not necessarily exist in some of the more mainline releases using mainline kernels. Read more on the [wiki:gscreboot GSC Reboot Wiki Page]
     230The reboot command, in it's natural form would only reset the CPU briefly, but often so fast that the entire set of system peripherals don't properly get reset. Thus, Gateworks has steered the reboot command to use a GSC sleep for 2 seconds to act like a reset/reboot, while actually fully power cycling the main supply. This is only implemented in Gateworks BSPs that contain the proper GSC drivers and will not necessarily exist in some of the more mainline releases using mainline kernels. ** Read more on the [wiki:gscreboot GSC Reboot Wiki Page]**
    231231
    232232== Does Newport support 10GbE or SFP+ ? ==