Context Navigation

Changes between Version 66 and Version 67 of faq

-              v66
+              v67
 The reboot command, in it's natural form would only reset the CPU briefly, but often so fast that the entire set of system peripherals don't properly get reset. Thus, Gateworks has steered the reboot command to use a GSC sleep for 2 seconds to act like a reset/reboot, while actually fully power cycling the main supply. This is only implemented in Gateworks BSPs that contain the proper GSC drivers and will not necessarily exist in some of the more mainline releases using mainline kernels. ** Read more on the [wiki:gscreboot GSC Reboot Wiki Page]**
+== Does Newport support 10GbE or SFP+ ? ==
+The Newport family of boards supports 1GbE by default.
+The CPU is capable of handling 10GbE ports. A custom board could be built to enable this.
+Please read more here: [wiki:newport/ethernet#a10GbE]
+Please email Gateworks at !sales@gateworks.com to discuss more.
+== Do Gateworks SBC support 10GbE or SFP+ ? ==
+The Catalina family of boards support 10GbE.
+The Catalina GW920x uses a 10GbE RJ45 copper port.
+The Catalina GW940x uses a 10GbE SFP+ port for copper or fiber optics.
+View the Catalin family here: [https://www.gateworks.com/products/industrial-single-board-computers/catalina-imx95-single-board-computers/]
 == What power conditioning does Gateworks offer on the SBCs? ==