Changes between Version 6 and Version 7 of jtag


Ignore:
Timestamp:
03/19/2018 06:15:36 PM (7 years ago)
Author:
Ron Eisworth
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • jtag

    v6 v7  
    77Gateworks has two models of JTAG programmers:
    88
    9 '''GW16042''' - uses 14-pin, 0.1" connector for Avila/Cambria/Laguna(GW2387, GW2388, GW2391) boards.
     9'''GW16042''' - uses 14-pin, 0.1" connector for Avila, Cambria, Laguna (GW2387, GW2388, GW2391) boards.
    1010
    11 '''GW16099''' - uses 10-pin, 0.05" connector for Laguna(GW2380, GW2382, GW2383)/Ventana/Newport boards.
     11'''GW16099''' - uses 10-pin, 0.05" connector for Laguna (GW2380, GW2382, GW2383), Ventana, Newport boards.
    1212
    1313Both of these programmers uses the FTDI [http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232D.pdf FT2232D ] which has two general purpose 8-bit ports.  The 1st port is configured for JTAG and utilizes the FTDI MPSSE engine. The 2nd port is configured for serial and used for the Serial Console.