Changes between Version 11 and Version 12 of newport/firmware


Ignore:
Timestamp:
01/24/2019 10:44:59 PM (6 years ago)
Author:
Tim Harvey
Comment:

update URL for jtag programming utility

Legend:

Unmodified
Added
Removed
Modified

  • newport/firmware

    v11 v12  
    8080 * Linux software is supported for programming Newport (jtag_usbv4 required). Windows is not supported. (serial console through Windows does work).
    8181 * JTAG Programming of eMMC is available, although it is a slower process, see [wiki:jtag_instructions here]
    82  * JTAG Programming of the GSC firmware is supported by the most recent version of jtag_usbv4 [http://dev.gateworks.com/jtag/linux/x86/jtag_usbv4 here]
     82 * JTAG Programming of the GSC firmware is supported by the most recent version of jtag_usbv4 [http://dev.gateworks.com/jtag/jtag_usbv4 here]
    8383  * [wiki:newport/firmware#UpdateGSCFirmwareviaJTAG Guide for GSC update via JTAG]
    8484
    … …  
    230230[=#jtag-gsc]
    231231=== Update GSC Firmware via JTAG ===
    232 To update the GSC firmware via JTAG download the {{{jtag_usbv4}}} application on a Linux x86 host from [http://dev.gateworks.com/jtag/linux/x86/jtag_usbv4 here] and execute as follows:
     232To update the GSC firmware via JTAG download the {{{jtag_usbv4}}} application on a Linux x86 host from [http://dev.gateworks.com/jtag/jtag_usbv4 here] and execute as follows:
    233233{{{#!bash
    234234./jtag_usbv4 -m gsc_630x_v49.txt