Changes between Version 6 and Version 7 of newport/firmware


Ignore:
Timestamp:
08/09/2018 08:17:45 PM (7 years ago)
Author:
Tim Harvey
Comment:

move pre-built images from svn.gateworks.com to dev.gateworks.com

Legend:

Unmodified
Added
Removed
Modified

  • newport/firmware

    v6 v7  
    8080 * '''Linux software is supported for programming Newport (jtag_usbv4 required).''' Windows is not supported at this time.''' (serial console through Windows does work).
    8181 * '''JTAG Programming of eMMC has not been made available yet'''. You must boot from a microSD image to program or re-program eMMC flash
    82  * '''JTAG Programming of the GSC firmware is supported by the most recent version of jtag_usbv4''' [http://svn.gateworks.com/jtag/linux/x86/jtag_usbv4 here]
     82 * '''JTAG Programming of the GSC firmware is supported by the most recent version of jtag_usbv4''' [http://dev.gateworks.com/jtag/linux/x86/jtag_usbv4 here]
    8383  * [wiki:/newport/firmware-update?action=edit#UpdateGSCFirmwareviaJTAG Guide for GSC update via Jtag]
    8484
    … …  
    207207[=#jtag-gsc]
    208208=== Update GSC Firmware via JTAG ===
    209 To update the GSC firmware via JTAG download the {{{jtag_usbv4}}} application on a Linux x86 host from [http://svn.gateworks.com/jtag/linux/x86/jtag_usbv4 here] and execute as follows:
     209To update the GSC firmware via JTAG download the {{{jtag_usbv4}}} application on a Linux x86 host from [http://dev.gateworks.com/jtag/linux/x86/jtag_usbv4 here] and execute as follows:
    210210{{{#!bash
    211211./jtag_usbv4 -m gsc_630x_v49.txt