Changes between Version 51 and Version 52 of newport

Timestamp:

04/13/2018 06:21:37 PM (7 years ago)

Author:

Cale Collins

Comment:

added ! to bootloader/serial/ethernet so it shows correctly on page.

newport

@@ -161 +161 @@
 [=#serial-ethernet-uboot]
 === Update Firmware via Serial Console and Ethernet from Bootloader ===
-If updating firmware via Bootloader/Serial/Ethernet (recommended for speed) you need to setup a TFTP server to host the files for transfer. Alternatively you could load firmware files from removable storage (microSD, mSATA, or USB for example) however the transfer rate is typically very slow compared to Gigabit Ethernet. For details on setting up a TFTP server see [wiki:tftpserver here].
+If updating firmware via !Bootloader/Serial/Ethernet (recommended for speed) you need to setup a TFTP server to host the files for transfer. Alternatively you could load firmware files from removable storage (microSD, mSATA, or USB for example) however the transfer rate is typically very slow compared to Gigabit Ethernet. For details on setting up a TFTP server see [wiki:tftpserver here].
 
 The following instructions assume your board target IP address is 192.168.1.1 and you have a TFTP server at 192.168.1.146. Adjust environment according to your network via 'setenv ipaddr <ipaddr>' and 'setenv serverip <serverip>'.