Changes between Version 50 and Version 51 of poe


Ignore:
Timestamp:
05/29/2026 05:40:25 PM (10 hours ago)
Author:
Ryan Erb
Comment:

add more catalina

Legend:

Unmodified
Added
Removed
Modified

  • poe

    v50 v51  
    55
    66PoE has evolved to define several different classes of power requirements:
    7  * class 0 - (no signature) max device power of 12.95W
    8  * class 1 - 4.0W available for max device power of 3.84W
    9  * class 2 - 7.0W available for max device power of 6.49W
    10  * class 3 - 15.4W available for max device power of 12.95W
    11  * class 4 (PoE+) - 30W available for max device power of 25.5W
    12  * class 5 (PoE++ type 3) - 60W available for max device power of 51W
    13  * class 6 (PoE++ type 4) - 100W available for max device power of 71W
     7 * Class 0 - (no signature) max device power of 12.95W
     8 * Class 1 - 4.0W available for max device power of 3.84W
     9 * Class 2 - 7.0W available for max device power of 6.49W
     10 * Class 3 - 15.4W available for max device power of 12.95W
     11 * Class 4 (PoE+) - 30W available for max device power of 25.5W
     12 * Class 5 (PoE++ type 3) - 60W available for max device power of 51W
     13 * Class 6 (PoE++ type 4) - 90W available for max device power of 71W
    1414
    1515
    … …  
    2929Gateworks supports a variety of Power-over-Ethernet solutions depending on product family.
    3030||= Family =||= Board =||= Supported =||= Notes =||
    31 || VeniceFLEX|| GW820x  || 802.3at 25.5W (active only)   ||  Requires optional GW168PB0-B||
     31||Catalina|| GW940x  || 802.3bt 51W (active only)   ||  Requires optional GW169PD0 ||
     32|| || GW920x  || 802.3bt 51W (active only)   ||  Requires optional GW169PB0 ^^^5^^^ ||
     33|| ||
     34|| VeniceFLEX|| GW820x  || 802.3bt 51W (active only)   ||  Requires optional GW168PB0^^^4^^^||
     35|| || GW810x  || 802.3bt 51W (active only)   ||  Requires optional GW168PA0||
    3236|| ||
    3337|| Venice   || GW730x  || 802.3at class 5 (J20), Passive^^^3^^^ (J21) || ||
    … …  
    5054||          || GW5913  || half-rectified^^^3^^^ 802.3at || ||
    51551. Jumper W1 selects passive (install) vs 802.3af (remove) voltage range
     562.  Reserved
    52573. Half-rectified or Passive PoE on Gateworks boards assumes positive on blue pair, negative on brown pair. A cross-over cable can be used for devices using the opposite polarity
     584. Revision D and earlier only support up to 40W, revision E and newer support up to 51W
     595. Revision A and earlier only support up to 40W, revision B and newer support up to 51W
     60
     61== Catalina
     62
     63The Catalina family offers isolated PoE to be CE ready.
     64
     65The GW9200 uses the GW169PB0 module that plugs on top of the GW9200 via some headers. This is not included by default with the standard GW9200, and the GW169PB0 is optional.
     66
     67The GW9400 uses the GW169PD0 module that plugs on top of the GW9400 via some headers. This is not included by default with the standard GW9400, and the GW169PD0 is optional.
     68
     69The GW169PB0 supports:
     70 * PoE Input 802.3bt
     71 * 10ms holdup time (802.3at PoE or 24VDC max required)
     72
     73The GW169PD0 supports:
     74 * PoE Input 802.3bt
     75 * 10ms holdup time (802.3at PoE or 24VDC max required)
     76 * PoE output (PSE) at 802.3at
    5377
    5478== VeniceFLEX