Changes between Version 51 and Version 52 of poe


Ignore:
Timestamp:
05/29/2026 06:48:24 PM (9 hours ago)
Author:
Ryan Erb
Comment:

add isolation column

Legend:

Unmodified
Added
Removed
Modified

  • poe

    v51 v52  
    2828== Gateworks PoE
    2929Gateworks supports a variety of Power-over-Ethernet solutions depending on product family.
    30 ||= Family =||= Board =||= Supported =||= Notes =||
    31 ||Catalina|| GW940x  || 802.3bt 51W (active only)   ||  Requires optional GW169PD0 ||
    32 || || GW920x  || 802.3bt 51W (active only)   ||  Requires optional GW169PB0 ^^^5^^^ ||
    33 || ||
    34 || VeniceFLEX|| GW820x  || 802.3bt 51W (active only)   || Requires optional GW168PB0^^^4^^^||
    35 || || GW810x  || 802.3bt 51W (active only)   ||  Requires optional GW168PA0||
    36 || ||
    37 || Venice   || GW730x  || 802.3at class 5 (J20), Passive^^^3^^^ (J21) || ||
    38 ||          || GW720x  || 802.3at class 4 (J17-A), Passive^^^3^^^ (J17-B) || ||
    39 ||          || GW710x  ||  Passive^^^3^^^ (J16) || ||
    40 || ||
    41 || Newport  || GW650x  || 802.3at class 4 (J21), Passive^^^3^^^ (J22) || ||
    42 ||          || GW640x  || 802.3at class 4 (J21), Passive^^^3^^^ (J22) || ||
    43 ||          || GW630x  || 802.3at class 4 (J19), Passive^^^3^^^ (J20) || ||
    44 ||          || GW620x  || 802.3at class 4 (J14), Passive^^^3^^^ (J16) || ||
    45 ||          || GW610x  || half-rectified^^^3^^^ Passive || ||
    46 ||          || GW6903  || full-rectified^^^3^^^ Passive || ||
    47 || ||
    48 || Ventana  || GW540x  || half-rectified^^^3^^^ 802.3af (both ports) || Jumper^^^1^^^ ||
    49 ||          || GW53xx  || half-rectified^^^3^^^ 802.3af (both ports) || Jumper^^^1^^^ ||
    50 ||          || GW52xx  || half-rectified^^^3^^^ 802.3af || Jumper^^^1^^^ ||
    51 ||          || GW51xx  || half-rectified^^^3^^^ Passive ||  ||
    52 ||          || GW552x  || half-rectified^^^3^^^ Passive (both ports) ||  ||
    53 ||          || GW5910  || half-rectified^^^3^^^ 802.3af || Jumper^^^1^^^ ||
    54 ||          || GW5913  || half-rectified^^^3^^^ 802.3at || ||
     30||= Family =||= Board =||= Supported =||= Isolation =||= Notes =||
     31||[#catalina Catalina]|| GW940x  || 802.3bt 51W (active only)   ||Yes ||   Requires optional GW169PD0, also features PoE Output (PSE) ||
     32|| || GW920x  || 802.3bt 51W (active only)   || Yes ||Requires optional GW169PB0 ^^^5^^^ ||
     33|| ||
     34|| [#veniceflex VeniceFLEX]|| GW820x  || 802.3bt 51W (active only)   || Yes || Requires optional GW168PB0^^^4^^^||
     35|| || GW810x  || 802.3bt 51W (active only)   ||Yes || Requires optional GW168PA0||
     36|| ||
     37|| Venice   || GW730x  || 802.3at class 5 (J20), Passive^^^3^^^ (J21) ||No || ||
     38||          || GW720x  || 802.3at class 4 (J17-A), Passive^^^3^^^ (J17-B) ||No || ||
     39||          || GW710x  ||  Passive^^^3^^^ (J16) ||No || ||
     40|| ||
     41|| Newport  || GW650x  || 802.3at class 4 (J21), Passive^^^3^^^ (J22) ||No || ||
     42||          || GW640x  || 802.3at class 4 (J21), Passive^^^3^^^ (J22) ||No || ||
     43||          || GW630x  || 802.3at class 4 (J19), Passive^^^3^^^ (J20) ||No || ||
     44||          || GW620x  || 802.3at class 4 (J14), Passive^^^3^^^ (J16) ||No || ||
     45||          || GW610x  || half-rectified^^^3^^^ Passive ||No || ||
     46||          || GW6903  || full-rectified^^^3^^^ Passive ||No || ||
     47|| ||
     48|| Ventana  || GW540x  || half-rectified^^^3^^^ 802.3af (both ports) ||No || Jumper^^^1^^^ ||
     49||          || GW53xx  || half-rectified^^^3^^^ 802.3af (both ports) ||No || Jumper^^^1^^^ ||
     50||          || GW52xx  || half-rectified^^^3^^^ 802.3af ||No || Jumper^^^1^^^ ||
     51||          || GW51xx  || half-rectified^^^3^^^ Passive ||No ||  ||
     52||          || GW552x  || half-rectified^^^3^^^ Passive (both ports) ||No ||  ||
     53||          || GW5910  || half-rectified^^^3^^^ 802.3af ||No || Jumper^^^1^^^ ||
     54||          || GW5913  || half-rectified^^^3^^^ 802.3at ||No || ||
    55551. Jumper W1 selects passive (install) vs 802.3af (remove) voltage range
    56562.  Reserved
    … …  
    59595. Revision A and earlier only support up to 40W, revision B and newer support up to 51W
    6060
     61[=#catalina]
    6162== Catalina
    6263
    63 The Catalina family offers isolated PoE to be CE ready.
     64The Catalina family offers isolated PoE to be CE ready with isolation and burst and surge protection with holdup.
    6465
    6566The GW9200 uses the GW169PB0 module that plugs on top of the GW9200 via some headers. This is not included by default with the standard GW9200, and the GW169PB0 is optional.
    … …  
    6869
    6970The GW169PB0 supports:
    70  * PoE Input 802.3bt
     71 * PoE Input 802.3bt up to 51W
     72 * Isolation
     73 * Uses Monolithic Power Devices MP8030GQJ
     74 * Burst and Surge Protection up to 2kV surge
     75 * Overload protection(OLP) with hiccup mode, short-circuit protection
     76(SCP), over-voltage protection (OVP), and thermal shutdown.
    7177 * 10ms holdup time (802.3at PoE or 24VDC max required)
    7278
    7379The GW169PD0 supports:
    74  * PoE Input 802.3bt
     80 * PoE Input 802.3bt up to 51W
     81 * Isolation
     82 * Uses Monolithic Power Devices MP8030GQJ
     83 * Burst and Surge Protection up to 2kV surge
     84 * Overload protection(OLP) with hiccup mode, short-circuit protection
     85(SCP), over-voltage protection (OVP), and thermal shutdown.
    7586 * 10ms holdup time (802.3at PoE or 24VDC max required)
    7687 * PoE output (PSE) at 802.3at
    7788
     89Note, Revision A and earlier only support up to 40W, revision B and newer support up to 51W
     90
     91[=#veniceflex]
    7892== VeniceFLEX
    7993
    … …  
    8296The GW8200 uses the GW168PB0-B module that plugs on top of the GW8200 via some headers. This is not included by default with the standard GW8200, and the GW168PB0-B is optional.
    8397
    84 The GW168PB0-B supports:
    85  * 802.3at
    86  * 10ms holdup time (802.3at PoE or 24VDC max required)
     98The GW168PA0 supports:
     99 * PoE Input 802.3bt up to 51W
     100 * Isolation
     101 * Uses Monolithic Power Devices MP8030GQJ
     102 * Burst and Surge Protection up to 2kV surge
     103 * Overload protection(OLP) with hiccup mode, short-circuit protection
     104(SCP), over-voltage protection (OVP), and thermal shutdown.
     105 * 10ms holdup time (802.3at PoE or 24VDC max required)
     106
     107The GW168PB0 supports:
     108 * PoE Input 802.3bt up to 51W
     109 * Isolation
     110 * Uses Monolithic Power Devices MP8030GQJ
     111 * Burst and Surge Protection up to 2kV surge
     112 * Overload protection(OLP) with hiccup mode, short-circuit protection
     113(SCP), over-voltage protection (OVP), and thermal shutdown.
     114 * 10ms holdup time (802.3at PoE or 24VDC max required)
     115
     116Note, Revision D and earlier only support up to 40W, revision E and newer support up to 51W
    87117
    88118== Passive PoE
    … …  
    177207Please note all PoE information on Gateworks SBCs and website pertain to PoE input to power the single board computer. There have been requests for Gateworks to offer PoE output to power something like an IP camera. There is usually a possibility of Gateworks modifying the SBC to allow for passive PoE output on the ethernet port that originally was designed for passive PoE input. This is achieved by reversing the protection diodes. Thus, the barrel jack input voltage would then be output through the passive PoE port in a passive fashion only. Active 802.3af output would not be provided.
    178208
    179 Gateworks does offer PoE output on the GW16083 expansion board with the GW16104 [https://www.gateworks.com/products/expansion-modules-single-board-computer/gw16083-expansion-module/ here]
     209Gateworks does offer PoE output on the GW169PD0 PoE Module for the Catalina GW9400. Read more [#catalina here]