Changes between Version 101 and Version 102 of sbcrevisions


Ignore:
Timestamp:
06/26/2026 04:26:06 PM (12 hours ago)
Author:
Ryan Erb
Comment:

update mia and add prev baud rate

Legend:

Unmodified
Added
Removed
Modified

  • sbcrevisions

    v101 v102  
    3131=== Revision C
    3232Date: 2025-06-25
    33  * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M2Q GPS
     33 * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M10Q GPS
    3434 * Add IO Expander to I2C2 to provide FSA card power enable control, presence detect, and an additional GPIO
    3535 * Adjust PCIe SWT_PERST# voltage levels
    … …  
    152152=== Revision F
    153153Date: 2025-09-22
    154  * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M2Q GPS, with optional battery backup
     154 * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M10Q GPS, with optional battery backup
    155155  * Note, GPS baud rate changed to 38400 baud, 8 data bits, no parity, 1 stop bit.
    156156 * Increase capacitance on input power supply
    … …  
    222222Date: 2025-08-20
    223223 * Increase capacitance on input power supply
    224  * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M2Q GPS, with optional battery backup
    225   * Note, GPS baud rate changed to 38400 baud, 8 data bits, no parity, 1 stop bit.
     224 * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M10Q GPS, with optional battery backup
     225  * Note, GPS baud rate changed to 38400 baud, 8 data bits, no parity, 1 stop bit (was 9600).
    226226
    227227
    … …  
    307307 * Increase capacitance on input power supply
    308308 * Improve PCB footprint for TVS diodes
    309  * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M2Q GPS, with optional battery backup
     309 * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M10Q GPS, with optional battery backup
    310310  * Note, GPS baud rate changed to 38400 baud, 8 data bits, no parity, 1 stop bit.
    311311
    … …  
    338338 * Add optional serial port flow control
    339339 * Change R336 and R337 pull down resistors on pin 56 and 58 of the J13 M.2 connector to be optional
    340  * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M2Q GPS, with optional battery backup
     340 * Replace optional u-blox ZOE-M8Q GPS with optional u-blox MIA-M10Q GPS, with optional battery backup
    341341  * Note, GPS baud rate changed to 38400 baud, 8 data bits, no parity, 1 stop bit.
    342342 * Add optional battery options (battery supports RTC on GSC and also provides power to GPS)