Changes between Version 19 and Version 20 of serial


Ignore:
Timestamp:
10/10/2019 09:55:57 PM (5 years ago)
Author:
Cale Collins
Comment:

fixed hwconfg link

Legend:

Unmodified
Added
Removed
Modified

  • serial

    v19 v20  
    606606
    607607=== Newport ===
    608 Most Newport products have a flexible [http://dev.gateworks.com/datasheets/sp335e.pdf MaxLinear SP335E] RS-232/RS-485/RS-422 transceiver which is software configurable. For these boards the Bootloader {{{hwconfig}}} environment variable can be used to configure the functionality of the serial ports at power-up between dual RS232 without flow control (default), single RS232 with hardware flow control, and RS485 (full/half duplex and optional termination). See [wiki:/newport/bootloader#hwconfig Newport bootloader hwconfig] for more details.
     608Most Newport products have a flexible [http://dev.gateworks.com/datasheets/sp335e.pdf MaxLinear SP335E] RS-232/RS-485/RS-422 transceiver which is software configurable. For these boards the Bootloader {{{hwconfig}}} environment variable can be used to configure the functionality of the serial ports at power-up between dual RS232 without flow control (default), single RS232 with hardware flow control, and RS485 (full/half duplex and optional termination). See [wiki:/newport/bootloader#hwconfig:serialConfiguration Newport bootloader hwconfig] for more details.
    609609
    610610If you wish to configure the SP335E transceiver yourself you can control it at runtime through the following GPIO's (which is what the Boot firmware will do for you via the {{{hwconfig}}} variable):